Eric Ruttan wrote:
Is it correct that a Shertz Beam is developed enough to produce a finished
product? For a pusher canard install?
If I am behind and there are suppliers, or someone might be interested, then
please post details here, or post a link to details, or post the details to
http://tinyurl.com/2aves
The url leads to a web site that has many members interested in pusher
installs of rotary engines.
Thank you
Eric.
The Schertz beam is more or less a concept rather than a specific device.
It refers to a simple beam under the fly wheel iron end housing end of the engine.
The beam is located under the oil pan flange rather than between the
oil pan flange and the engine. It uses low cost Barry Controls industrial
rubber bushings as motor mounts. Very similar to a Questair Venture motor mount.
Here are two examples.
Paul Lamar
ERuttan wrote:
Is anyone here offering, or considering offering, a Shertz Beam mount
for sale?
We have several members that are ready to buy the conversionconcepts.com
mount.
It seems the Shertz Beam has quite a few advantages, but our members
might not want to build one, and they are already to buy a mount now.
Thanks for the help.
Yes Jerry Hey builds Schertz beam mounts for rotaries.
mailto:j-winddesigns@thegrid.net
http://j-winddesigns.com/
His mounts are about half the cost and probably lighter in weight than
the conversion concepts mounts. He has built several mounts for people
on here. Pictures on request.
Jerry invented this adjustable welding jig so he could adapt
to a variety of airplanes and motor mount methods. Any prop flange
distance from the firewall or firewall motor mount bolt pattern
can be accommodated. The PSRU/adapter plate method is shown in the
picture. A Schertz beam type mount is no problem.
Jerry also has some other products useful for installing rotaries.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.