Subject: News letter shut down again
From: ACRE
Date: 5/4/2004, 7:30 AM


I'll be in northern Florida for a week so don't send any messages
as they will not be posted.

I'll try and get over to Tracy's... Tracy willing and take some pictures
of his new RX8 engine installation. I will also try to get some pictures
of Francois's Piper Turbo Arrow with the Mistral turbo rotary at
Embry Riddle in Daytona.

Paul Lamar


Hi Paul,

The Rotary Arrow installation is progressively working better.  We flew
it 30 mn on Saturday.  Coolant temperature stayed in the green. Oil temp
was creeping up over 65% power, staying put at 60%.  It is consistent
with the 10 gal/mn oil flow we seem to have.  It seems we just have to
increase the oil flow to 16 gal/mn or above and we should be fine... at
least until we hit the next limitation!  :-)  Nobody ever said it was
easy.
Several among your NewsLetter's participants are helping us with great
advice.  I thank them and I thank you for putting us together.  It saves
us probably weeks of head scratching!

You are welcome to visit us again at Daytona Beach.  However, would you
please warn Peter of your visit a day in advance?  Thanks.  Also, be
aware that the Arrow will be grounded for 1-2 weeks starting next
Monday.  We'll be installing a flight data recording computer  (82
channels, 15 data points on all channels per second, I am sure you'll
love the graphs!  ;-)  ), a bunch of sensors... and we'll be taking care
of the oil pump.

Sincerely yours,

Francois Badoux

Good! Maybe I can get a ride while I am there on Thursday or Saturday. Can you warn Peter
now by phone. I will send a copy of this to him. I'll be available for a few days
if they need help as I will be staying nearby.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.