Thanks.  I already had these.  Is the fuel/air mix going through
these or just the air?  My problem with all the things I don't
understand is that I don't much care for the idea of having fuel
injectors doing their thing any distance from where combustion takes
place without a "door" to close.  I can just see engine fires
developing from an abundance of fuel vapors in the induction system.
I think most of you are going with two injectors in the housings and
two in the runners, but I always figured that those in the runners
would be close to the ports, with the throttle body or bodies outside
all this.

You can also drop this line if you like, and I will develop some
patience and "wait and see" in Jerry's final design.

Bob

Bob,  our design has both injectors on the cold side, throttle body at
the housing.   As safe as we can make it.  Also,  I am going to  shield
the exhaust from the intake.    Jerry

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.