ACRE wrote:

Jerry Hey wrote:

Here are the results of the static load test.  The Schertz beam is .063
mild steel.  The unsupported section is 30 inches. Using feeler gages
between the .5 inch thick steel plate and the top of the Schertz Beam,
it was determined that at 6.5" from the center  the beam deflected .012
Inches.   This was not visible to the eye.   Mild steel seems to be
strong enough to do the job.  Of course, we are planning on using 4130.
  Jerry

Excellent work Jerry. Thanks a bunch for doing this. The thing about mild steel
is the fatigue life. If there is any vibration it is likely to crack long
term.

Paul Lamar

BTW Jerry those oil pan clips can look like this. This will pick up those
missing pan bolts near the oil pan corners. The flange is on the outside of bolts.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.