I'm going to take my duct off soon, to re-finish it.
I'm thinking about trying to fly it without the duct, I'm concerned

about

take-off distance, climb-rate, and cooling. I'll make some high-speed

taxi

runs first, to see how it feels.

Perry

Good idea Perry. I forgot how we measured the acceleration the last time.
Use a stop watch and see how long it currently takes you to get to
50 MPH. Also with the duct off see what the static RPM is.

Paul Lamar

Vance W Jaqua wrote:

Good for you Perry! I will go out on a limb and predict that the take off
run will be a bit longer but do able, and the inflight perfomance will
be measurably better. If you have not checkd my web page on prop
design, you will find some curves that give relative perf at various
disc loading based on momentum laws which set the 100percent
limits, and above 150 mph the loss due to small props is not great
Vance

When you look at that dinky 38" prop on the back of a Long-EZ with the
duct removed, you think "that couldn't possibly work"!

Perry

Get an acceleration base line with the duct on before you take it off. 

Or attempt to take off without it for that matter.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.