Subject: Schertz beam barry centers
From: ACRE
Date: 5/27/2004, 9:44 AM

Jerry Hey wrote:

How much distance between Barry centers is needed regardless of exhaust
type?  Is 29 inches plenty for the turbo?  Whatever the distance, add
2.5 inches  for the overall length of the beam.  What is the maximum
length beam that could be put inside most cowls  originally intended
for a 0360 Lyc?   The  beam is  14.5 inches behind prop flange and 7.75
inches below the thrust line.  Please measure your cowls and let me
know.    I will have a number of hat sections formed at the max. length
that will fit the majority of cases.  They can always be cut to a
shorter length for special cases.   Jerry

My Kis Cruiser cowl allows about a 29 inch center to center bushing
spacing using the motor plate method. With the schertz beam it
would be further back giving a bit more cowl clearance. 

If you want to make it narrower you might be able to use the P51 style beam 
motor mount shown in this 3D and perhaps tuck it under the turbo.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.