Subject: All aluminum rotary
From: ACRE
Date: 5/28/2004, 9:20 AM


     > Does anyone have any thoughts on the durability of an all aluminum rotary.
     > Why hasn't Mazda done it?  Cost or heat efficiency?
     >
     > >> Has anyone used the Racing Beat PP housings? I don't feel comfortable
     > >> reworking a housing.
     > >>
     > >> PP [rotor housing] for non-turbo
     > >> http://www.racingbeat.com/resultset.asp?PartNumber=11021
     > >> $837.00
     > >>
     > >> PP [rotor housing] for turbo
     > >> http://www.racingbeat.com/resultset.asp?PartNumber=11024
     > >> $837.00
     > >>
     > >> What about building up a complete aluminum engine using these parts?
     > >> Sure they are expensive, but you are still looking at probably less than
     > >> $8K for an engine, low by airplane standards. They have a part for the
     > >> 20B as well.
     > >>
     > >> Aluminum Intermediate housing
     > >> http://www.racingbeat.com/resultset.asp?PartNumber=11061
     > >>
     > >> $1,550.00
     > >>
     > >> Aluminum Rear Side housing
     > >> http://www.racingbeat.com/resultset.asp?PartNumber=11071
     > >> $1,200.00
     > >>
     > >> Aluminum Front Side housing
     > >> http://www.racingbeat.com/resultset.asp?PartNumber=11051
     > >> $1,200.00
     > >>
     > >> Aluminum Rear Side housing 20B
     > >> http://www.racingbeat.com/resultset.asp?PartNumber=11072
     > >> $1,200.00
     > >>
     > >> --
     > >> Perry Mick
     > >> http://www.ductedfan.com

     Douglas Fir wrote:
     >
     > Does anyone have any thoughts on the durability of an all aluminum rotary.
     > Why hasn't Mazda done it?  Cost or heat efficiency?

     Cost probably. The competition is stiffer now and they need an all aluminum
     3 rotor in the RX8. Durability should be about the same as the rotor housing
     with steel lined aluminum end housings.

     Paul Lamar


-> Ben Baltrusaitis wrote:

Paul,
How far away do you think Mazda is from a 3-rotor for the RX-8.
I need a 20B, but would hate to get one and 6 months later have Mazda come out with an aluminum version.
Thanks!
Ben

I have no idea but if we all bug Mazda Corp. might happen sooner rather than later.
Tell them you need more torque and squirt off the line.  Used to be Mazda rotaries 
were faster than anything. Now you can buy econo boxes with all aluminum 
turbo piston engines that are faster and cheaper than the RX8.

No replacement for displacement :)

mailto:JBarnes5@mazdausa.com

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.