Ben Schneider wrote:
Some food for thought here guys. Lets say for the sake of argument that we are using the 13b in all aluminum. That nets (if I rememeber from previous posts)
roughly 55 lbs weight savings. Unless you are going to design an airplane around the engine, or extend your engine mount about a foot, (tractor anyway, don't
know much about canards W&B) it would not benefit you much especially for the cost. You would have to ad ballast or extend the engine mount making the
airplane look like one of those turbine conversion afterthoughts (which in my opinion look kinda silly) The standard 13b is very comparable in weight to a
lycosaurus making it an excellent match for the airframe.
The way I see it is unless you are putting a rotary on an airframe designed for a much smaller powerplant, then the aluminum housings are just extra expense.
(save designing an airframe around the engine)
At least that is the way it looks from my figuring. But go easy on me, as I am not an engineer, just a fellow rotorhead building an RV7.
Ben Schneider
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.