Subject: New Topic- Air Cooling a Rotary
From: ACRE
Date: 5/28/2004, 8:09 PM


"Lemings, Bob" wrote:

Paul,

Has any consideration ever been given to air-cooling a Rotary?  I
realize this is a fire-breathing heat generator, but one liquid on board is
better than two.  What if cooling fins were added to the rotor and side
housings and oil flow added to the coolant passages instead of coolant--
increase the size of the oil cooler, oil flow, and the quantity of oil
available to recirculate.  Maybe someone out there is proficient in
Thermodynamics that could do some calculations?  What are the heat transfer
properties of engine oil (Mobil 1, of course) compared to Ethylene Glycol
and water.  Ethylene Glycol by itself is very poor, I know.

Bob Lemings

Its been done but the big problem is cooling between the rotors.
No problem on a one rotor engine. Come to think of it that might
be an easier way to make an all aluminum one rotor. I should apply
for a patent :) Also while we are on the the subject it is easier
to make an aluminum front housing if you use an external oil pump.
Are you listening Richard? If you mill some parts of the ribs out of the
rotor housing you could feed coolant into and out of just the rotor
housing and cool the end housings with just air. No casting would
be required for these air cooled end housings as it can all be done
with a manual mill if necessary.

Paul Lamar


Richard wrote:

Paul,
I am listening, and I also have an air cooled single rotor, you have seen
it. I came to the conclusion, after looking very closely at that engine,
that it would be very difficult to air cool with the power density I am
dealing with on my present design.

Richard Sohn
N-2071U
unicorn@gdsys.net
www.gdsys.net/WWWmembers/unicorn/

Just the end housings and not the whole thing. You still have the oil cooling
and the rotor housing. I think it will work. I think it is worth a try
as it is easy to make on an NC mill. No castings or patterns.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.