Subject: PPort Housings CF manifold
From: ACRE
Date: 5/31/2004, 8:42 AM


The missing piece is the intake manifold.  I am hoping that Ed will
produce a first class aluminum manifold for us.  I plan to see him in
a
couple of weeks with throttle bodies in  hand.  There is also the CF
manifold possibility.  I will cooperate with anyone who is working on
this.   Are you interested?      Jerry

Alex Madsen wrote:

Hi Jerry,

I would love to help you with your p port work. I am the one that has
been working on Carbon Fiber intake manifolds. I will begin producing
a
proof of concept manifold soon. I am happy to cooperate with you in
the
development of a CF manifold for your P Port design. E-Mail me if you
are interested.

Alex Madsen
madsena@rose-hulman.edu


Alex,  the p port manifold has two runners that connect to the
throttle bodies that are located at the housing.  They sweep up over
the top of the engine to the cold side where the injectors, two for
each runner, have to be mounted. The four injectors need to be
parallel to each other so they can be connected to the fuel rail. I am
attaching Paul's drawing.  This is the hard part. If you can do it,
you can do the rest, I'm sure. After the injectors there will be an
intake air plenum with air cleaner.  The runners are 2" O.D.   A
smooth interior is important.      Jerry

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.