Jerry Bass wrote:

13B Maxda engine Almost full firewall-forward. $5700

The Assembly has a fresh Bruce Turrentine built engine with a Ross 2.85 Redrive and Tracy Crook's EC2.

I coppied Tracy's instructions for the enbine mount and intake runners. Two radiators include a fibreglass baffle on the left and an aluminum on the right. The Oil cooler is out of a Mazda. I have blocked the bypass closed.  You can have the twisted firewall parts for patterns. The price includes Starter, Injectors, Ignighters and a new Water Pump. It also includes a Spin Tech muffler and related pipe. The GB has my designed Thrust bearing with oiler.

I also have a Prince Prop as an Option, at $1200. New it's $1600.

I will keep the rubber mounts, and alterntor. And some temperature and pressure sensors for my Grand Rapid engine monitor.

Email me at Jerrymarge@myexcel.com

Jerry Bass
540-932 3125
Cell 241-2675

No jpg picture was attached Jerry

Is this the engine that was overeheated and caused the crash?

Paul

Jerry Bass wrote:

I did not send a pix.  No I had my old engine rebuilt by Bruce. I will replace the sick engine when I get a buyer.  I will send a pix, later.  Thanks

Jerry Bass
540-932 3125
Cell 241-2675

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.