BTW you will need to make that Schertz beam go all the way across
or the loads on the pan bolts will be too high. Unless of course
that is a 3rd gen rear housing and you are using larger bolts.

Paul Lamar

Perry Mick wrote:

Yes I know. The drawing was made assuming a 3rd gen REW, but if it's
anything else such as Renesis, it will have the Schertz beam.

Perry

I just did not want to confuse anybody.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.