Subject: Oil pump cavitation, Oil flow
From: ACRE
Date: 6/3/2004, 3:43 PM


I'm not certain of the pump model (Dave Atkins rebuilt the engine) but I
presume it is the stock 20B pump.  It seems unlikely to me that the screen
could make that much difference.  I estimated the total area of the screen
to be about 30 sq. cm.; and that the open area was about half of that.
However; if the domed screen is against the bottom of the pan, or the end
of
the tube is near the screen (or both), the effective area would be much
less.

Al

Is it a real 20B Al or  has it been made with 13B parts?

Paul Lamar

It's a 'real' 20B.  Came from Japan.

Al

The reason I ask is Bruce Turrentine builds up 20 B's from mostly 13B parts.
Nothing wrong with that unless the 20B oil pump is larger. It should be as
you have 50% more engine there. I have not had my 20B torn down to check.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.