Jerry Hey wrote:

Paul,  You got to love this.   Some of the dimensions are just
guesses.
It is the idea that counts.  Straight out the bottom of the cowl.
Jerry

Yep I sure do. Not the lowest drag way of doing it but dirt simple :)

Paul Lamar

How about twisting the whole thing so that it exits the bottom of the
cowl
horizontally facing back, incorporating a wide but narrow augmentor
to draw
cooling air through the cowl.
Paul your are the master of Rhino here!

Would it hurt if the the fishmouth is not symetrical? I guess things
would
be easier if the fishmouth feeding tube can come down on the side of
the
engine and can connect to the mouth at the same side so it doesn't
have to
be centered symetrically on it.

Thomas J. :)

Yes that would work. But why not come out the side like a PT6? It is
easier to
clean the crud off the side of the fuse rather than the bottom.

Paul Lamar

There could be a serious criticism about which end of the fish applies.
  Can we change this thread to" Simple Tangential with Fish Tail"?
Jerry

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.