Subject: Kiss Cowl 1
From: ACRE
Date: 6/5/2004, 1:16 AM

Jerry Hey wrote:

Paul,
Looking at  your drawing showing the Kiss firewall and also by holding
my old firewall behind the engine,  it appears that there may be room
for the under belly radiator. It would require a custom oil pan.
Draw a new oil  pan that is 1.5 inches deep at the front end  so it
just hides behind the Schertz  beam and slopes down like  your present
oil pan.    The  pan bottom could be a wide  plate that will also serve
as the top of the plenum.   This will help cool the oil.  Or if one is
worried about heating the air before it passes through the radiator,
build a separate plenum just  below the pan bottom. A very small
percentage of a hugh volume of air would contact the pan bottom, I
think.     The firewall measures 28.5 inches top to bottom at its
maximum height.    Jerry

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.