Subject: Oil Pan-plenum-rad -louver holder
From: ACRE
Date: 6/5/2004, 8:00 PM


Jerry Hey wrote:

Consider making the bottom of the oil pan from a sheet of aluminum
folded to make up the sides of the plenum.  It could be extended  down
to hold (first) the radiator (tabs with nut plates welded to rad)  and
(second) the louvers.   This would completely eliminate the VERY LARGE
problem of how to hang the rad and louvers.      Jerry


That is a great idea Jerry. I was just about to say the new Kis layout
box Schertz could use the stock oil pan:) This might improve the oil
cooling
a bit as well.

Paul Lamar


Could this not pose cracking problems for the oil pan. Perhaps a frame that
fits snuggly around the pan and picks up some of the pan bolts would be
safer.

John

Certainly would be something you would want to worry about.
Cracking is not such as large a problem with the rotary as it is with 
a piston engine. It has very low vibration
level. Perry Mick has been flying for years with the rotary bolted
solidly to the air frame.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.