Jerry Hey wrote:
Consider making the bottom of the oil pan from a sheet of aluminum
folded to make up the sides of the plenum. It could be extended down
to hold (first) the radiator (tabs with nut plates welded to rad) and
(second) the louvers. This would completely eliminate the VERY LARGE
problem of how to hang the rad and louvers. Jerry
That is a great idea Jerry. I was just about to say the new Kis layout
box Schertz could use the stock oil pan:) This might improve the oil
cooling
a bit as well.
Paul Lamar
While you're at it, you might consider making the aluminum oil pan with
cooling fins similar to mine. See attached pictures. Paul Conner
Nice work Paul. Did that guy in Denver build it for you?
Paul Lamar
Old message:
________________________________________________
Subject: Finned Oil Pan
Date: Fri, 13 Jun 2003 08:17:27 -0700
From: ACRE <rotaryeng@earthlink.net>
Organization: ACRE
You might buy some of this extrusion and make a sump tank out of it.
It will dissipate any heat that is in the fuel when the fuel is
recirculated to the sump tank. The neat thing about the sump tank on
the back of the firewall is you can see that you have fuel
with a clear plastic sight tube on the instrument panel.
When it starts to go down you know you are in real trouble :)
One peice of this on the floor of the sump tank should be enough.
Perry Mick is probably building an oil pan out of this stuff as we
speak.
Paul Lamar
Perry Mick wrote:
How did you guess? Yes, I've designed an oil pan with fins.
Unfortunately, that 5013 extrusion is not in stock, they would have to
manufacture it. Which means I would have to buy several hundred pounds
of the stuff. So I'm looking at other extrusions or possibly having the
fins made of 1/16" aluminum angles welded on both sides of a 1/8" plate.
A welder I know in the Denver area will weld it up for me. He has been
in the welding business for 25 years. I'm hoping this will reduce my oil
temps, it is better than adding another oil cooler. If it works, my
friend in Denver will produce them for people who want one.
I removed the oil cooler from the plane this morning to tap in all 8 (!)
of those measurement points you want.
--
Perry Mick
Custom Composite Props
mick@bridgingworlds.com
http://www.ductedfan.com
Maybe we get get a bunch of orders together and buy a batch.
Anybody else interested in five feet of this stuff. What would several
hundred
pounds cost Perry? Anything in stock similar?
Paul Lamar
Hi, Perry.....If your friend in Denver decides to make the finned oil pans,
I'll buy one for certain. Thanks. Paul Conner
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.