Kevin Richey wrote:
Hi Paul:
Can you tell me how to find this tech brief that's
listed on your web page for research material?
I've tried all combinations of key words on the
NASA
Tech Brief site in their search form to no
avail...
Do you have it stored anywhere?
Thanks,
Kevin
http://naca.larc.nasa.gov/
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.
Kevin Richey wrote:
Paul:
Using the link you provided, all it came up with is a
thin plate analysis by a H.G. Lew in 1952! No mention
of rotary engines, Moller, OMC, or thermal barrier or
wear coats...
And again, no results in using their simple or the
advanced search with the key words of Moller, OMC, or
the title, "Test of Thermal-Barrier and Wear Coats in
Rotary Engines".
Do you have the source of the original material?
Thank you,
Kevin
The NASA search engine sucks.
Search this list.
http://techreports.larc.nasa.gov/
Index RECONselect contains the following 119 items relevant to 'Wankel'. The first figure for each entry is its relative score,
1000 -1 Chances for the wankel engine/ques/ <chancen fuer den wankel motor/ques/<., Dec 01, 1964
950 -1 The Wankel compressor as a heat-pump compressor, May 01, 1976
772 -1 Whatever happened to the Wankel engine, May 01, 1977
750 -1 Wankel engines for aircraft, REPT-908, Feb 01, 1971
730 -1 Comparison of miniature powerplants for small-size aircraft with Wankel and two-cycle piston engines, Jan 01, 1991
724 -1 The Wankel RC Engine- Design and Performance., Jan 01, 1968
724 -1 Experimental and analytical comparisons of the performance and combustion characteristics of gasoline, methane, and methanol in a Wankel
engine, Jan 01, 1977
722 -1 Wankel aircraft engines, Jun 01, 1969
708 -1 Motor glider with Wankel engine - K8B/KM 914, SF-24/KM 29, Feb 01, 1971
708 -1 Calculations of the unsteady, three-dimensional flow field inside a motored Wankel engine, SAE PAPER 880625, Feb 01, 1988, LeRC
704 -1 A study of the displacement of a Wankel rotary engine, SAE PAPER 930684, Mar 01, 1993
690 -1 Some tests on the combustion in the NSU- Wankel type rotary piston engine., Feb 01, 1968
686 -1 The Wankel engine as a future power source for powered gliders and light aircraft, Apr 01, 1970
681 -1 Turbine, Wankel, and Stirling engines., AICHE PREPRINT 45A, Dec 01, 1966
656 -1 Performance tests and design modifications of a Wankel type rotary combustion automobile engine in order to determine its suitability for
aircraft application, CSIR-ME-1521, Jun 01, 1977
642 -1 Simulation of the wave action in the inlet and exhaust system and calculation of the burnt mass fraction in a rotary Wankel engine, Jan 01, 1977
639 -1 Nonpumped fuel injection in Wankel rotary piston engines, Mar 01, 1977
635 -1 Adiabatic Wankel type rotary engine, NASA-CR-182233, Sep 01, 1988
630 -1 Computer simulation of a Wankel rotary engine - Analysis and graphics, Jan 01, 1986
629 -1 Theoretical analysis of Wankel engine combustion., Jan 01, 1972
626 -1 A study of the dynamic instabilities of the apex seal and the chatter phenomena in Wankel rotary engines, Jan 01, 1975
623 -1 Experimental and theoretical analysis of Wankel engine performance, SAE PAPER 780416, Feb 01, 1978
614 -1 Fluid flow and fuel-air mixing in a motored two-dimensional Wankel rotary engine, AIAA PAPER 86-1556, Jun 01, 1986, LeRC
577 -1 Parametric design of a rotary-combustion test engine, ASME PAPER 76-WA/DE-25, Dec 01, 1976
574 -1 A performance of a spark ignition Wankel engine: Including the effects of crevice volumes, gas leakage, and heat transfer, NASA-CR-177240,
Jun 01, 1983
528 -1 Numerical simulation of the flowfield in a motored two-dimensional Wankel engine, Jun 01, 1987, LeRC
501 -1 Fuel-air mixing and combustion in a two-dimensional Wankel engine, SAE PAPER 870408, Feb 01, 1987, LeRC
488 -1 Two surprises for the Hanover exposition: Thrust gondola SG 85, Fanliner - Porsche of the air, Apr 01, 1974
486 -1 Performance and combustion characteristics of direct-injection stratified-charge rotary engines, NASA-TM-100134, Dec 01, 1987, LeRC
482 -1 Rotaries for GA - NASA gets serious, Oct 23, 1982
481 -1 An improved rotary mechanism engine, Jan 01, 1977
461 -1 Some problems associated with machining epitrochoidal profiles, Jan 01, 1970
457 -1 Wankel aircraft engines /conclusion/ /Lotnicze silniki wankla-dokonczenie/., Jul 01, 1969
448 -1 A Survey of Technology for Hybrid Vehicle Auxiliary Power Units, AD-A300457, Oct 01, 1995
435 -1 A performance model of a spark ignition Wankel engine: Including the effects of crevice volumes, gas leakage, and heat transfer. Volume 2,
NASA-CR-177239, Jun 01, 1983
433 -1 Rotary Piston Engines, Jan 01, 1968
424 -1 The passenger aircraft of tomorrow. III, Mar 01, 1970
420 -1 Utilization of continuous fuel feed in a rotary-piston engine with planetary motion of the rotor, Jan 01, 1970
420 -1 On the determination of the envelope of a family of epitrochoids with applications., May 01, 1966
420 -1 Review of literature on vehicle techniques, Feb 16, 1966
416 -1 Evaluation of the amount of gas leakage from the chamber of a rotary-piston engine on the basis of gas-analysis results, Jan 01, 1970
414 -1 Review of the Rhein-Flugzeugbau Wankel powered aircraft program, Jan 01, 1978
402 -1 New engine technology, Jul 01, 1982
399 -1 Ground support equipment: Low pollutant fuels, AD-755151, Sep 01, 1972
395 -1 Advanced general aviation engine/airframe integration study, NASA-CR-165565, Mar 01, 1982
393 -1 The relative behavior of a rotary engine apex seal to the walls of a slot, Nov 01, 1976
388 -1 Structural analysis of a rotary combustion engine rotor, SAE PAPER 870447, Feb 01, 1987
380 -1 Rotary engines, Mar 01, 1983
376 -1 Canadair rotary wing technology development, Jan 01, 1982
376 -1 The Seventh Annual Fairey Lecture - The better conservation of liquid fuels for mobile use, Aug 08, 1976
376 -1 New developments in powder metal sealing elements, Jan 01, 1974
373 -1 Rotary engine technology, Mar 01, 1991, LeRC
373 -1 RE 1-11 rotary expander engine testing and analysis, Jan 01, 1983
371 -1 Nonlinear energy devices, Jan 01, 1976
370 -1 A new source of lightweight, compact multifuel power for vehicular, light aircraft and auxiliary applications - The joint Deere Score engines,
ASME PAPER 88-GT-271, Jun 01, 1988
368 -1 An Otto for the automobile. II, May 01, 1977
368 -1 Flux-vector splitting algorithm for chain-rule conservation-law form, Jul 01, 1991, LeRC
367 -1 Rotary expander engine program, Jan 01, 1979
366 -1 The engine of tomorrow. rotating or reciprocating piston/ques/, Apr 04, 1963
366 -1 Deformation analysis of rotary combustion engine housings, NASA-CR-188187, Jan 01, 1991
366 -1 New technologies for general aviation aircraft, SAE PAPER 790613, Apr 01, 1979
365 -1 A review of Curtiss-Wright rotary engine developments with respect to general aviation potential, SAE PAPER 790621, Apr 01, 1979
363 -1 Materials for sealing elements in rotary engines, Aug 01, 1976
361 -1 Performance, emissions, and physical characteristics of a rotating combustion aircraft engine, NASA-CR-135119, Dec 01, 1976
358 -1 Rotary expander engine development program, AD-A055662, Jan 15, 1978
313 -1 Rotary engines., Feb 01, 1969
306 -1 Influence of working fluid leakage on the compression process in an experimental rotary- piston engine, Jan 01, 1969
300 -1 Indicator tests with rotary-piston engines, Jan 01, 1967
298 -1 Development on exhaust emissions and fuel economy of the rotary engine at Toyo Kogyo, SAE PAPER 780417, Feb 01, 1978
298 -1 Current status of alternative automotive power systems and fuels. Volume 2: Alternative automotive engines, EPA-460/3-74-013-B-VOL-2,
Jul 01, 1974
296 -1 The RC engine - A new approach to reduce costs, SAE PAPER 700273, Apr 01, 1970
296 -1 Investigation of eccentrically rotating axial seals for fluids, Jun 01, 1969
295 -1 An update of the development on the new Audi NSU rotary engine generation, SAE PAPER 780418, Feb 01, 1978
290 -1 Regenerative internal combustion engine. I - Theory, Apr 01, 1990
289 -1 Mechanism analysis of a cam driven rotary engine, SAE PAPER 880659, Feb 01, 1988
286 -1 Installation, maintenance and operating manual for the Lucas-type fuel injection system of the 3 B rotary engine, NASA-TM-77872, May 01,
1985
280 -1 The regenerative internal combustion engine. I - Theory, AIAA PAPER 88-3063, Jul 01, 1988
280 -1 Recently developed heat resistant hard alloys /Ferro-Titanide/ and their application, Jan 01, 1974
278 -1 An overview of NASA research on positive displacement type general aviation engines, NASA-TM-79254, Jan 01, 1979, LeRC
277 -1 Development of a motorboat for high seas and winter, Jun 01, 1969
276 -1 Heat transfer in a rotary piston engine, Jun 01, 1976
275 -1 Sources of hydrocarbon emissions in rotary engines, SAE PAPER 780419, Feb 01, 1978
275 -1 Development of a novel rotary engine, Jan 01, 1976
275 -1 Dynamic analysis of rotary engine apex seals, Jan 01, 1979
274 -1 Analysis of light-load performance in rotary engines, SAE PAPER 790435, Feb 01, 1979
274 -1 Rotary combustion engine hydrocarbon source studies, Apr 01, 1978
274 -1 Rotary expander development program, Jan 01, 1978
273 -1 Hybrid drive for motor vehicles with a preponderantly intermittent method of operation, NASA-TM-75215, Dec 01, 1977
273 -1 The consumer's electric car, Jan 01, 1977
273 -1 Heat release characteristics of stratified-charge rotary engines, SAE PAPER 870443, Feb 01, 1987
273 -1 General aviation energy-conservation research programs at NASA-Lewis Research Center, NASA-TM-73884, Jan 01, 1977, LeRC
272 -1 Israel Conference on Mechanical Engineering, 11th, Technion - Israel Institute of Technology, Haifa, Israel, July 11, 12, 1977, Proceedings, Jan
01, 1977
272 -1 Rotary engine combustion with hydrogen addition, SAE PAPER 760611, Aug 01, 1976
272 -1 Experimental analysis of IMEP in a rotary combustion engine, NASA-TM-81662, Jan 01, 1981, LeRC
271 -1 A characterization of exhaust emissions from lean burn, rotary, and stratified charge engines, SAE PAPER 770301, Feb 01, 1977
270 -1 Experimental analysis of IMEP in a rotary combustion engine, SAE PAPER 810150, Feb 01, 1981, LeRC
270 -1 Experimental verification of thermoelastic instabilities in sliding contact, ASME PAPER 76-LUB-21, Oct 01, 1976
269 -1 Hybrid propulsion system with a gyro component for economic and dynamic operation, NASA-TM-75188, Nov 01, 1977
268 -1 General aviation internal combustion engine research programs at NASA-Lewis Research Center, AIAA PAPER 78-932, Jul 01, 1978, LeRC
268 -1 Performance, emissions, and physical characteristics of a rotating combustion aircraft engine, supplement A, NASA-CR-135119, May 01, 1980
264 -1 Multi-fuel rotary engine for general aviation aircraft, NASA-TM-85428, Jun 27, 1983, LeRC
263 -1 Seamos, the German Navy's remote radar eye, Jan 01, 1991
262 -1 Literature searches and analyses with respect to possible reductions of exhaust emissions of piston-engine aircraft, in particular with reference to
applied technologies, engine concepts and fuels, Aug 01, 1992
260 -1 NASA research on general aviation power plants, AIAA PAPER 79-0561, Feb 01, 1979, LeRC
259 -1 Mazda rotary engine technology - Combustion characteristics, Jan 01, 1986
256 -1 Advanced stratified charge rotary aircraft engine design study, NASA-CR-165398, Jan 29, 1982
255 -1 Real time pressure signal system for a rotary engine, Jan 31, 1984, LeRC
255 -1 Initial test results for the RE1-11 rotary expander engine, Jan 01, 1980
254 -1 The Norton P73 rotary RPV engine, Jan 01, 1988
251 -1 Power plants and future fuels; Proceedings of the Conference, London, England, January 21, 22, 1975, Jan 01, 1976
251 -1 Visualization of flows in a motored rotary combustion engine using holographic interferometry, NASA-TM-88804, Jan 01, 1986, LeRC
250 -1 ETX-I: First generation single-shaft electric propulsion system program. Volume 1: Powertrain, DE87-008354, Feb 01, 1987
250 -1 Visualization of flows in a motored rotary combustion engine using holographic interferometry, AIAA PAPER 86-1557, Jun 01, 1986, LeRC
248 -1 Rotary engine design: Analysis and developments; Proceedings of the International Congress and Exposition, Detroit, MI, Feb. 27-Mar. 3, 1989,
SAE SP-768, Jan 01, 1989
248 -1 Canadair rotary wing R.P.V. technology development. II, Jan 01, 1982
Also here is another bib. This one came from the Stanford Library computer.
Folio copy 03/26/98 at 11:32
EI/Compendex / Find THESAURUS ROTARY COMBUSTION ENGINES and SINCE 1/1/93
142 Brief citations
1) Rajan, Sun et al. "Influence of ethanol addition on the combustion and
emission characteristics of a two-rotor Wankel engine"
Proceedings of the 1997 Spring Technical Conference of the ASME Internal
Combustion Engine Division, Fort Collins, CO. USA. Advanced Engine Design
American Society of Mechanical Engineers, Internal Combustion Engine
Division (Publication) ICE v 3 1997. ASME, New York, NY, USA. p 49-53.
2) Anon (Ed.) "Proceedings of the Future Transportation Technology Conference
and Exposition"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. 188p.
Shimizu, Ritsuharu et al. "Characteristics of fuel consumption and exhaust
emissions of the side exhaust port rotary engine"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. p 181-188 950454.
ai ey, Stephen G. et al. "Review and thermodynamic analysis of a
rotary-vee internal combustion engine"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. p 167-180 950453.
5) Meyer, Andrew E. et al. "High speed electronic fuel injection for direct
injected rotary engine"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. p 153-165 950452.
6) Peng, L.X. et al. "Development of a unique fuel flexible engine Part II~-~--~
Thermodynamic model analysis"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAB Special Publications n 1108 1995. SAB, Warrendale, PA,
USA. p 111-118 950096.
7) Peng, L.X. et al. "Development of a unique fuel flexible engine Part I.
Engine design and physical model"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. p 85-90 950093.
8) O'Connor, Leo "Reciprocating rotating-block engine"
MECHANICAL ENGINEERING. Mechanical Engineering v 117 n 6 Jun 1995. p
70-71.
9) Anon "Rotary engine makes a high power comeback"
DESIGN ENGINEERING (LONDON). Design Engineering (London) Mar 1995. p
25-26.
10) Hamai, Yuji et al. "Two-dimensional computer simulation of a low pressure
direct injection stratified charge rotary engine (Cycle-to-cycle
variation of air-fuel mixture distribution)"
NIPPON KIKAI GAKKAI RONBUNSHIJ, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu, B
Hen/Transactions of the Japan Society of Mechanical Engineers, Part B v
60 n 579 Nov 1994. p 3900-3907.
11) Vargas, Jose V.C. et al. "Analysis of a cylindroids rotary engine"
Proceedings of the 16th Annual Fall Technical Conference on the Internal
Combustion Engine Division, ASME, Lafayette, IN, USA. Heavy Duty Engines
A Look at the Future American Society of Mechanical Engineers, Internal
Combustion Engine Division (Publication) ICE 22 1994. ASME, New York,
NY, USA. p 215-229.
12) Shih, A.J. "Kinematics of the cycloidal internal combustion engine
mechanism"
JOURNAL OF MECHANICAL DESIGN, TRANSACTIONS OF THE ASME. Journal of
Mechanical Design, Transactions Of the ASME v 115 n 4 Dec 1993. p
953-959.
13) Abraham, J. et al. "3-D computations of premixed-charge natural gas
combustion in rotary engines."
SAE (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAE Trans v 100 n
Sect 3 1991, 910625 p 910-922. l-56091-274-X.
14) Anon (Ed. ) "International Congress and Exposition."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series 1991. Publ by SAB, Warrendale, PA, USA. var paging.
15) Preston, Charles S. et al. "Closed cycle, high-altitude rotary engine for
unmanned ozone sampler."
Future Transportation Technology Conference and Exposition, Costa Mesa,
CA, USA. SAE Technical Paper Series. Pubi by SAE, Warrendale, PA, USA,
921548. p 1-7.
16) Willis, Edward A. et al. "NASA's Rotary Engine Technology Enablement
Program. 1983 Through 1991."
International Congress and Exposition, Detroit, MI, USA. SAB Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 920311. p 1-11.
17) Jones, Charles "Stratified charge rotary engine developments at JDTI from
1984 to 1991."
International Congress and Exposition, Detroit, MI, USA. SAB Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920310. p 1-10.
18) Shimizu, Ritsuharu et al. "Mazda 4-rotor rotary engine for the Le Mans
24-hour endurance race."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Pubi by SAE, Warrendale, PA, USA, 920309. p 1-10.
19) Dimpelfeld, Philip M. et al. "Design and testing of a natural gas fueled
5.8 liter rotary engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920307. p 1-9.
20) Abraham, J. et al. "3-D computations to improve combustion in a
stratified-charge rotary engine. Part III. Improved ignition
strategies."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920304. p 1-10.
21) Raju, M. S. "Heat transfer and performance characteristics of a
dual-ignition Wankel engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920303. p 1-43.
22) Morimoto, Kenji et al. "Combustion characteristics in hydrogen fueled
rotary engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920302. p 1-7.
23) Bartrand, Timothy A. et al. "Rotary engine performance limits predicted by
a zero-dimensional model."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920301. p 1-17.
24) DeFilippis, M. et al. "Effects of pocket configuration on the flow field
in a rotary engine assembly."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Pubi by SAB, Warrendale, PA, USA, 920300. p 1-15.
25) Kim, Kyu-Jung et al. "Performance simulation for spark ignition wankel
rotary engine."
Proceedings of the 6th International Pacific Conference on Automotive
Engineering. Proc 6 Int Pac Conf Autom Eng. Publ by Korea Soc of
Automotive Engineers, Inc, 1638-3, Socho-dong, Seoul, South Korea. p
237-245.
26) Hamady, F. et al. "Experimental analysis of blowby and flow field
interaction in a motored rotary engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 910893. 27p.
27) Revankar, G. S. "Development of a stratified charge rotary engine apex
seal material."
International Congress and Exposition, Detroit, MI, USA. SAB Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 910627. 16p.
28) Rachel, T. et al. "Analysis of frictional power losses associated with the
side and apex seals of a Wankel rotary engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 910626. lop.
29) Abraham, J. et al. "3-D computations of premixed-charge natural gas
combustion in rotary engines."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 910625. 13p.
30) Hamai, Yuji et al. "Two-dimensional computer simulation of unsteady flow
field inside a rotary engine."
3rd Triennial International Symposium on Fluid Control, Measurement, and
Visualization - FLUCOME ?91, San Francisco, CA, USA. Flucome ?91 3
Trienn Int Symp Fluid Control Meas Visualization Flucome 91. Publ by
ASME, New York, NY, USA. p 223-230.
31) Griffith, Mike et al. "Rotary engine powered ducted fan for aircraft
applications."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAB Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 241-248.
32) Matsuda, Ikuo et al. "New technology employed for the latest 13B-rotary
engine."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAB Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 230-240.
33) Eiermann, Dankwart et al. "Introduction of a new ultra-lite multipurpose
Wankel engine."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAB Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 218-229.
34) Osumi, Toshihiko et al. "Prediction of power output performance of the
rotary engine by gas exchange process simulation."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAE Trans v 99 n
Sect 3 1990. Pubi by SAB, Warrendale, PA, USA, 1990 p 208-217.
35) Chouinard, E. et al. "Airflow visualization and LDV measurements in a
motored rotary engine assembly part 2. LDV measurements."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAE Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 184-207.
36) Hamady, F. et al. "Airflow visualization and LDV measurements in a motored
rotary engine assembly part 1. Flow visualization."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAB Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 163-183.
37) Matsuura, Kenji et al. "Measurement and theoretical analysis of the
under-seal pressure of rotary engine apex seals."
NIPPON KIKAI GAKKAI RONBUNSHU, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu B Hen v
57 n 540 Aug 1991 p 2845-2853.
38) Hamai, Yuji et al. "Two-dimensional computer simulation of unsteady flow
during the intake-compression stroke of a rotary engine."
NIPPON KIKAT GAKKAI RONBUNSHU, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu B Hen v
57 n 539 Jul 1991 p 2293-2300.
39) Muroki, Takumi et al. "Study of an outline of combustion for a Direct
Injection Stratified-Charge Rotary Engine."
International Off-Highway and Powerplant Congress and Exposition,
Milwaukee, WI, USA. SAB Technical Paper Series. Publ by SAB, Warrendale,
PA, USA, 901600. llp.
40) Matsuura, Kenji et al. "Measurement of the relative behavior of a rotary
engine apex seal to the side of a slot using magnetic induction."
NIPPON KIKAI GAKKAI RONBUNSHtJ, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu B Hen v
56 n 526 Jun 1990 p 1812-1817.
41) Osumi, Toshihiko et al. "Prediction of power output performance of the
rotary engine by gas exchange process simulation."
NIPPON KIKAI GAKKAI RONBUNSHU, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu B Hen v
56 n 523 Mar 1990 p 858-861.
42) Griffith, Mike et al. "Rotary engine powered ducted fan for aircraft
applications."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAB, Warrendale, PA, USA. 8p 900037.
43) Matsuda, Ikuo et al. "New technology employed for the latest 13B-rotary
engine."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAB, Warrendale, PA, USA. llp 900036.
44) Osumi, Toshihiko et al. "Prediction of power output performance of the
rotary engine by gas exchange process simulation."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAB, Warrendale, PA, USA. lOp 900032.
45) Chouinard, E. et al. "Airflow visualization and LDV measurements in a
motored rotary engine assembly. Part 2. LDV measurements."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAB, Warrendale, PA, USA. 24p 900031.
46) Hamady, F. et al. "Airflow visualization and LDV measurements in a motored
rotary engine assembly. Part 1. Flow visualization."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAE, Warrendale, PA, USA. 21p 900030.
47) Maiti, R. et al. "Limits on modification of epitrochoid used in rotary
piston machines and the effects of modification on geometric volume
displacement and ripple."
INGENIEUR-ARCHIV. Ing Arch v 60 n 3 1990 p 183-194.
48) Walker, James W. et al. "STRATIFIED CHARGE ROTARY ENGINE."
Automotive Engine Alternatives, Proceedings of the International
Symposium on Alternative and Advanced Automotive Engines., Vancouver,
BC, CAn. Publ by Plenum Press, New York, NY, USA p 203-218.
49) Nagao, Akihito et al. "PRESENT STATUS AND FUTURE VIEW OF ROTARY ENGINES."
Automotive Engine Alternatives, Proceedings of the International
Symposium on Alternative and Advanced Automotive Engines., Vancouver,
BC, Can. Publ by Plenum Press, New York, NY, USA p 183-201.
50) Yu Nai-biao et al. "DEVELOPMENT OF A MULTIFUEL ROTARY COMBUSTION ENGINES."
DONGLI GONGCHENG. Dongli Gongcheng n 5 Oct 15 1987 p 51-56.
51) King, Steven R. "DURABILITY OF NATURAL GAS FUELED ROTARY ENGINES."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAE, Warrendale,
PA, USA Pap 870448, lOp.
52) Lee, C. M. et al. "ESTIMATION OF INSTANTANEOUS HEAT TRANSFER COEFFICIENTS
FOR A DIRECT-INJECTION STRATIFIED-CHARGE ROTARY ENGINE."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAE, Warrendale,
PA, USA Pap 870444, 9p.
53) Dimpelfeld, Philip et al. "HEAT RELEASE CHARACTERISTICS OF
STRATIFIED-CHARGE ROTARY ENGINES."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAB, Warrendale,
PA, USA Pap 870443, llp.
54) Orlandea, N. V. et al. "COMPUTER SIMULATION OF THE ROTARY ENGINE APEX SEAL
SYSTEM."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAE, Warrendale,
PA, USA Pap 870410, 15 p.
55) Grasso, F. et al. "THREE-DIMENSIONAL COMPUTATIONS OF FLOWS IN A
STRATIFIED-CHARGE ROTARY ENGINE."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAB, Warrendale,
PA, USA Pap 870409, 67p.
56) Shih, T. I. -P. et al. "FUEL-AIR MIXING AND COMBUSTION IN A
TWO-DIMENSIONAL WANKEL ENGINE."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAE, Warrendale,
PA, USA Pap 870408, 29p.
57) Maiti, R. et al. "KINEMATICS OF ACTIVE CONTACT IN MODIFIED EPITROCHOID
GENERATED ROTARY PISTON MACHINES."
MECHANISM & MACHINE THEORY. Mech Mach Theory v 23 n 1 1988 p 39-45.
58) Nguyen, H. L. et al. "PERFORMANCE AND EFFICIENCY EVALUATION AND HEAT
RELEASE STUDY OF AN OUTBOARD MARINE CORPORATION ROTARY COMBUSTION
ENGINE."
NASA TECHNICAL MEMORANDUM. NASA Tech Memo 89833 1987 22p.
59) Tatsutomi, Y. et al. "ROTARY ENGINE TECHNOLOGIES - PRESENT AND FUTURE."
INTERNATIONAL JOURNAL OF VEHICLE DESIGN. Int J Veh Des v 8 n 2 1987 p
192-204.
60) Jones, Charles "ROTARY ENGINE AIMS TO SCORE GOALS THIS DECADE."
CME, CHARTERED MECHANICAL ENGINEER. CME Chart Mech Eng v 34 n 4 Apr 1987
p 46-50.
61) Williams Douglas "DEERE'S ROTARY SPINS TOWARD PRODUCTION."
AUTOMOTIVE INDUSTRIES. Automot Ind v 166 n 11 Nov 1986 p 88-89, 91.
62) Shih, T. I-P. et al. "FLUID FLOW AND FUEL-AIR MIXING IN A MOTORED
TWO-DIMENSIONAL WANKEL ROTARY ENGINE."
AIAA/ASME/SAB/ASEE 22nd Joint Propulsion Conference., Huntsville, AL
USA. AIAA Paper Publ by AIAA, New York, NY, USA Pap AIAA-86-1556, lop.
63) Pelekis, E. et al. "NEW SIMPLE ROTATORY MOTION INTERNAL COMBUSTION ENGINE
OF HIGH EFFICIENCY AND LOW MANUFACTURING COST."
Energy Conservation in Industry, Proceedings of the International
Seminar. Volume 2: Engines and Batteries., Duesseldorf, West Ger.
Commission of the European Communities, (Report) EUR 9236 v 2. Publ by
VDI Verlag, Duesseldorf, West Ger p 116-124.
64) Matsuura, Kenji et al. "RETARDED PRESSURE BUILDUP BEHIND A ROTARY ENGINE
APEX SEAL."
BULLETIN OF THE JSME. Bull JSME v 29 n 254 Aug 1986 p 2585-2591.
65) Goddard, D. et al. "ADVANCED ROTARY ENGINE COMPONENTS UTILIZING FIBER
REINFORCED Mg CASTING."
AIAA/ASME/SAB/ASEE 22nd Joint Propulsion Conference., Huntsville, AL,
USA. AIAA Paper Publ by AIAA, New York, NY, USA AIAA-86-1559, 7p.
66) Mount, R. E. et al. "HIGH PERFORMANCE, STRATIFIED CHARGE ROTARY ENGINES
FOR GENERAL AVIATION."
AIAA/ASME/SAE/ASEE 22nd Joint Propulsion Conference., Huntsville, AL,
USA. AIAA Paper Publ by AIAA, New York, NY, USA AIAA-86-1553, 12p.
67) Kamo, R. et al. "ADIABATIC WANKEL TYPE ROTARY ENGINE."
Adiabatic Engine: Global Developments., Detroit, MI, USA. SAE Special
Publications SP-650. Publ by SAB, Warrendale, PA, USA p 201-212.
68) DeMeis, Richard "ROTARY GROWS UP."
ABROSPACE AMERICA. Aerosp Am v 24 n 6 Jun 1986 p 48-51.
69) Kamo, R. et al. "ADIABATIC WANKEL TYPE ROTARY ENGINE."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860616, 14p.
70) Lychuk, W. M. et al. "STRESS AND DEFORMATION MODELING OF MULTIPLE ROTARY
COMBUSTION ENGINE TROCHOID HOUSINGS."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860614, lOp.
71) Roberts, J. A. et al. "COMPUTER MODELS FOR EVALUATING PREMIXED AND DISC
WANKEL ENGINE PERFORMANCE."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860613, 17p.
72) Goddard, David M. et al. "GRAPHITE/MAGNESIUM COMPOSITES FOR ADVANCED
LIGHTWEIGHT ROTARY ENGINES."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860564, 9p.
73) Chen, T. N. et al. "DETONATION CHARACTERISTICS OF INDUSTRIAL NATURAL GAS
ROTARY ENGINES."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860563, lip.
74) Kulina, Mark R. "EXPERIMENTAL EVALUATION OF ROTARY ENGINE TIMING GEAR
LOADS."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAE,
Warrendale, PA, USA Pap 860562, 9p.
75) Dopkin, Joseph A. "ROTARY ENGINE TIMING GEAR LOAD MEASUREMENTS."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860561, 9p.
76) Muroki, Takumi et al. "MATERIAL TECHNOLOGY DEVELOPMENT APPLIED TO ROTARY
ENGINE AT MAZDA."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860560, 9p.
77) Shidahara, Yasuhiro et al. "DEVELOPMENT OF SLIDING SURFACE MATERIAL FOR
COMBUSTION CHAMBER FOR HIGH-OUTPUT ROTARY ENGINE."
Motor Vehicle Technology: Mobility for Prosperity, Third International
Pacific Conference on Automotive Engineering., Jakarta, Indones.
Proceedings - Society of Automotive Engineers P-169. Publ by SAB,
Warrendale, PA, USA p 11-18.
78) Bunting, B. G. "DEVELOPMENT OF AN ELECTRONIC CONTROL FOR A ROTARY FUEL
PUMP."
Electronics and the Diesel Engine. Presented at the 1984 ASME Diesel and
Gas Engine Power Division Technical Conference., Boulder, CO. USA. Publ
by ASME, New York, NY, USA p 19-25.
79) Ohzeki, H. et al. "PRESENT AND FUTURE OF ROTARY ENGINE TECHNOLOGY."
INTERNATIONAL JOURNAL OF VEHICLE DESIGN. Int J Veh Des v 4 n 6 Nov 1983
p 571-586.
80) Jones, Charles et al. "DESIGN OF A HIGH-PERFORMANCE ROTARY
STRATIFIED-CHARGE RESEARCH AIRCRAFT ENGINE."
AIAA/SAB/ASME 20th Joint Propulsion Conference., Cincinnati, OH, USA.
AIAA Paper Publ by AIAA, New York, NY, USA AIAA-84-1395, llp.
81) Muroki, Takumi "RECENT TECHNOLOGY DEVELOPMENT OF HIGH-POWERED ROTARY
ENGINE AT MAZDA."
West Coast International Meeting & Exposition - Society of Automotive
Engineers., San Diego, CA, USA. SAB Technical Paper Series Publ by SAE,
Warrendale, PA, USA 841017, lOp.
82) Knoll, J. et al. "DYNAMIC ANALYSIS OF ROTARY COMBUSTION ENGINE SEALS."
NASA TECHNICAL MEMORANDUM. NASA Tech Memo TM-83536 1984 isp.
83) Sierens, R. et al. "COMBUSTION STUDIES IN A ROTARY ENGINE."
International Conference on Combustion in Engineering., Oxford, Engi. I
Mech E Conference Publications (Institution of Mechanical Engineers)
1983-3 v 2. Publ by Mechanical Engineering Publ Ltd, Bury St. Edmunds,
Suffolk, Engl for Inst of Mechanical Engineers. p 31-4.
84) Meng, P. R. et al. "PRELIMINARY RESULTS ON PERFORMANCE TESTING OF A
TURBOCHARGED ROTARY COMBUSTION ENGINE."
International Congress & Exposition (SAB)., Detroit, Mich, USA. SAE
Preprints (Society of Automotive Engineers) Publ by SAE, Warrendale, Pa,
USA 8203S4, 12p.
85) Jones, Charles "UPDATE OF APPLICABLE AUTOMOTIVE ENGINE ROTARY STRATIFIED
CHARGE DEVELOPMENTS."
International Congress & Exposition (SAB)., Detroit, Mich, USA. SAE
Preprints (Society of Automotive Engineers) Publ by SAB, Warrendale, Pa,
USA 820347, 22p.
86) Willis, Edward A. "DEVELOPMENT POTENTIAL OF INTERMITTENT COMBUSTION (I. C.
AIRCRAFT ENGINES FOR COMMUTER TRANSPORT APPLICATIONS."
NASA TECHNICAL MEMORANDUM. NASA Tech Memo 82869 May 1982 30p.
87) Willis, Edward A. et al. "OVERVIEW OF GENERAL AVIATION PROPULSION RESEARCH
PROGRAMS AT NASA- LEWIS RESEARCH CENTER."
SAB PREPRINTS. SAB Prepr n 810624 for Meet Apr 7-10 1981 19 p.
88) Tompkins, Robert M. et al. "INITIAL TEST RESULTS FOR THE REl-il ROTARY
EXPANDER ENGINE."
PROCEEDINGS OF THE INTERSOCIETY ENERGY CONVERSION ENGINEERING
CONFERENCE. Proc Intersoc Energy Convers Eng Conf lSth, Energy to the
21st Century, v 1, Seattle, Wash, Aug 18-22 1980. Publ by AIAA, New
York, NY, 1980 Pap 809131, p 686-690.
89) Shimamura, Kenji et al. "FUEL ECONOMY IMPROVEMENT OF ROTARY ENGINE BY
USING CATALYST SYSTEM."
SAB PREPRINTS. SAB Prepr n 810277 for Meet Feb 23-27 1981 11 p.
90) Schock, H. J. et al. "EXPERIMENTAL ANALYSIS OF IMEP IN A ROTARY COMBUSTION
ENGINE."
SAB PREPRINTS. SAB Prepr n 810150 for Meet Feb 23-27 1981 16 p.
91) Stradomskiy, M. V. et al. "HEAT TRANSFER IN CHAMBERS OF ROTARY
INTERNAL-COMBUSTION ENGINES."
HEAT TRANSFER - SOVIET RESEARCH. Heat Transfer Soy Res v 12 n 5 Sep-Oct
1980 p 101-105.
92) Adam, Andrei "SYVARO'S SP-440, AIR COOLED, ROTARY-TROCHOIDAL ENGINE."
SAB PREPRINTS. SAB Prepr n 800974 for Meet Sep 8-11 1980 17 p.
93) Meunier, Robert et al. "ROTARY EXPANDER ENGINE PROGRAM."
PROCEEDINGS OF THE INTERSOCIETY ENERGY CONVERSION ENGINEERING
CONFERENCE. Proc Intersoc Energy Convers Eng Conf 14th, v 1, Boston,
Mass, Aug 5-10 1979. Publ by Am Chem Soc, Washington, DC, 1979. Also
available from IEEE (Cat n 79CH1477-9 ENERGY), Piscataway, NJ p
1049-1054.
94) Tatsutomi, Y. et al. "DEVELOPMENT STATUS ON FUEL ECONOMY OF THE ROTARY
ENGINE AT TOYO KOGYO."
INSTITUTION OF MECHANICAL ENGINEERS, CONFERENCE PUBLICATIONS. I Mech E
Conf Publ n 1979-13, Passenger Car Power Plant of the Future, Pap,
London, Engl, Oct 2-4 1979. Publ by Mech Eng Publ Ltd for Inst of Mech
Eng, London, Engl, 1979 p 43-52.
9S) Bayer, Robert J. et al. "ROTARY COMBUSTION ENGINE HYDROCARBON SOURCE
STUDIES."
ANNUAL PROCEEDINGS - RELIABILITY PHYSICS (SYMPOSIUM). Combust Inst. Cent
States Sect, Spring Tech Meet, Tech Pap, West Lafayette, Indiana, Apr
3-5 1978 Sponsored by the Combust Inst, Cent States Sect 41 p.
96) Kohno, Toshiyuki et al. "ROTARY ENGINE'S LIGHT-LOAD COMBUSTION IMPROVED."
AUTOMOTIVE ENGINEERING (WARRENDALE, PENNSYLVANIA). Automot Eng
(Warrendale Pa) v 87 n 8 Aug 1979 p 33-38.
97) Nardelli, R. J. "INDUSTRIAL ROTARY ENGINE OFFERS SIGNIFICANT ADVANTAGES."
PIPELINE AND GAS JOURNAL. Pipeline Gas J v 205 n 8 Jul 1978 p 42, 44-45,
48.
98) Bick, D. E. "ROTARY ENGINES EM DASH SOME DESIGN LESSONS FROM THE PAST."
CHARTERED MECHANICAL ENGINEER. Chart Mech Eng v 25 n 6 Jun 1978 p 82-83.
99) Burley, Harvey A. et al. "SOURCES OF HYDROCARBON EMISSIONS IN ROTARY
ENGINES."
SAB PREPRINTS. SAB Prepr n 780419 for Meet Feb 27-Mar 3 1978 20 p.
100) Yamamoto, Kenichi et al. "DEVELOPMENT ON EXHAUST EMISSIONS AND FUEL
ECONOMY OF THE ROTARY ENGINE AT TOYO KOGYO."
SAB PREPRINTS. SAB Prepr n 780417 for Meet Feb 27-Mar 3 1978 22 p.
101) Leucht, Philip M. "ROTARY ENGINE EXPERIMENTAL MEASUREMENTS USING
TELEMETRY."
LUBRICATION ENGINEERING. Lubr Eng v 34 n 2 Feb 1978 p 85-93.
102) Blair, G. P. et al. "UNSTEADY GAS FLOW BEHAVIOUR IN A CHARGE COOLED
ROTARY PISTON ENGINE."
SAB PREPRINTS. SAB Prepr n 770763 for Meet, Sep 12-15 1977 24 p.
103) Kumar, M. L. et al. "IMPROVED ROTARY MECHANISM ENGINE."
DEFENCE SCIENCE JOURNAL. Def Sci J v 27 n 1 Jan 1977 p 43-S2.
104) Kamiya, Shigeyasu et al. "SUZUKI PRODUCTION ROTARY ENGINE, MODEL RE-S FOR
POWERING MOTORCYCLES."
SAB PREPRINTS. SAB Prepr n 770190 for Meet, Feb 28-Mar 4 1977 18 p.
105) Matsuura, Kenji et al. "RELATIVE BEHAVIOR OF A ROTARY ENGINE APEX SEAL TO
THE WALLS OF A SLOT."
BULLETIN OF THE JSME. Bull JSME v 19 n 137 Nov 1976 p 1367-1375.
106) Leucht, Philip M. "ROTARY ENGINE EXPERIMENTAL MEASUREMENTS USING
TELEMETRY."
PREPRINTS - TRIBOLOGY CONFERENCE. ASLE Prepr 31st Annu Meet,
Philadelphia, Pa, May 10-13 1976 Pap 76-AM-5B-4, 9 p.
107) Chicurel, Ricardo "DEVELOPMENT OF A NOVEL ROTARY ENGINE."
NTC CONFERENCE RECORD - NATIONAL TELECOMMUNICATIONS CONFERENCE.
Intersoc Energy Convers Eng Conf, 11th, Proc, State Line, Nev, Sep
12-17 1976 Publ by AIChE, New York, NY, 1976 v 1 SAE Pap 769014 p
73-79.
108) Lehmann, Edward J. (Ed. ) "AUTOMOBILE AIR POLLUTION, PART 4. NEW
AUTOMOTIVE ENGINES AND ENGINE IMPROVEMENTS: CITATIONS FROM THE NTIS
DATA BASE."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). NTlSearch
NTIS/PS-76/0187/5E15, Search period covered 1970-Feb 1976. Publ by Natl
Tech Inf Serv, Springfield, Va, Mar 1976, 111 p. Available from Eng
Index, New York, NY or NTIS.
109) Reitz, R. D. et al. "STUDIES TOWARD OPTIMAL CHARGE STRATIFICATION IN A
ROTARY ENGINE."
COMBUSTION SCIENCE AND TECHNOLOGY. Combust Sci Technol v 12 n 1-2-3
1976 p 63-74.
110) Loyd, Robert "CURTISS-WRIGHT STRATIFIED CHARGE ROTARY ENGINE
DEVELOPMENT."
COMBUSTION SCIENCE AND TECHNOLOGY. Combust Sci Technol v 12 n 1-2-3
1976 p 47-61.
111) Anon "JUST ANOTHER ROTARY?"
ENGINEERING (LONDON). Engineering (Lond) v 21S n 7 Jul 1975 p S84-S86.
112) Robinson, F. J. et al. "ANALYSIS OF EPITROCHOIDAL PROFILES WITH CONSTANT
DIFFERENCE MODIFICATION SUITABLE FOR ROTARY EXPANDERS AND PUMPS."
JOURNAL OF ENGINEERING FOR INDUSTRY, TRANSACTIONS OF THE ASME. J Eng
Ind Trans ASME v 98 Ser B n 1 Feb 1976 p 161-16S.
113) Robinson, F. J. et al. "ANALYSIS OF EPITROCHOIDAL PROFILES WITH CONSTANT
DIFFERENCE MODIFICATION SUITABLE FOR ROTARY EXPANDERS AND PUMPS."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). ASME Pap n
75-WA/DE-lo for Meet Nov 30-Dec 5 1975, 5 p.
114) Atesmen, k. M. "HEAT TRANSFER IN ROTARY COMBUSTION ENGINES."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). ASME Pap n 75-HT-FF
1975, 6 p.
115) McCuiston, F. D. Jr. "ANALYTICAL EVALUATION OF THE EFFECT OF LEAKAGE ON
NO EMIS IONS FROM A ROTARY ENGINE."
SAB PREPRINTS. SAB Prepr n 750023 for Meet Feb 24-28 1975, 6 p.
116) Atesmen, K. M. "HEAT TRANSFER IN ROTARY COMBUSTION ENGINES."
JOURNAL OF HEAT TRANSFER, TRANSACTIONS ASME. J Heat Transfer Trans ASME
v 97 Ser C n 2 May 1975 p 288-293.
117) Miglin, J. et al. "DEVELOPMENT OF TROCHOID COATINGS FOR THE
CURTISS-WRIGHT ROTARY ENGINE."
MCIC REPORT (METALS AND CERAMICS INFORMATION CENTER). MCIC Rep
MCIC-74-17, Apr 1974, for Meet, Battelle Columbus Lab, Ohio, Nov 14-15
1973, p 1-12. Available from NTIS (AD-779-152K), Springfield, Va.
118) Hacha, T. H. "APEX SEAL WEAR IN A MAZDA ROTARY ENGINE EM DASH EFFECTS OF
FUEL AND LUBRICANT PROPERTIES UTILIZING RADIOISOTOPE TEST TECHNIQUES."
SAB PREPRINTS. SAB Prepr n 741067 for Meet Oct 21-25 1974, 10 p.
119) Mayer, William J. et al. "RADIOMETRIC METHOD FOR APEX SEAL WEAR
MEASUREMENTS IN ROTARY ENGINES."
SAB PREPRINTS. SAB Prepr n 741066 for Meet Oct 21-25 1974, 8 p.
120) Lamping, H. D. et al. "ROTARY COMBUSTION ENGINE TROCHOID COATINGS AND
SEALS."
SAB PREPRINTS. SAB Prepr n 741043 for Meet Oct 21-25 1974, 18 p.
121) Anon "MULTI-FUELED ROTARY PISTON ENGINE DEVELOPED."
OCEAN INDUSTRY. Ocean Ind v 9 n 6 Jun 1974 p 87-89.
122) Girardi, Vincent J. et al. "BROACHING THE EPITROCHOIDAL FORM."
TECHNICAL PAPER - SOCIETY OF MANUFACTURING ENGINEERS. SME Tech Pap n
MM73-657 for Meet Nov 14-15 1973, 18 p.
123) Ellis, John "EPITROCHOID LININGS AND SEALS."
TECHNICAL PAPER - SOCIETY OF MANUFACTURING ENGINEERS. SME Tech Pap n
MM73-652 for Meet Nov 14-15 1973, 19 p.
124) Bauer, A. F. "TRANSPLANT COAT IN ROTARY ENGINES."
TECHNICAL PAPER - SOCIETY OF MANUFACTURING ENGINEERS. SME Tech Pap n
MM73-651 for Meet Nov 14-15 1973, 17 p.
125) Jones, Charles "DEVELOPMENT OF THE ROTARY ENGINE."
TECHNICAL PAPER - SOCIETY OF MANUFACTURING ENGINEERS. SME Tech Pap n
MM73-650 for Meet Nov 14-15 1973, 30 p.
126) Rodgers, J. J. et al. "ROTARY ENGINE TEST TO EVALUATE LUBRICANTS FOR
CONTROL OF ROTOR DEPOSITS."
SAB PREPRINTS. SAB Prepr n 740159 for Meet Feb 25-Mar 1 1974, 12 p.
127) Hartley, John "ROTARY ENGINE MANUFACTURE."
ENGINEERING MATERIALS AND DESIGN. Eng Mater Des v 18 n 5 Jun 1974 p
21-23.
128) Pedersen, Harry "GRINDING THE ROTARY ENGINE TROCHOIDAL BORE."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). ASME Pap n 74-DE-ll
for Meet Apr 1-4 1974, 7 p.
129) Kobayashi, Akira "VANE-MOTOR WITH RHOMBIC LINK DRIVE."
BULLETIN OF THE JSME. Bull JSME v 16 n 101 Nov 1973 p 1693-1701.
130) Statkus, F. D. et al. "DESIGN, CALCULATIONS, AND TESTING OF A NEW ROTARY
INTERNAL COMBUSTION ENGINE."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). ASME Pap n
73-WA/DE-21 for Meet Nov 11-15 1973 9 p.
131) Anon "KAROL ROTARY ENGINE UNDERGOING U. K. DEVELOPMENT."
MOTOR SHIP. Mot Ship v 54 n 639 Oct 1973 p 343.
132) Edwards, Geoff (Ed. ) "ROTARY ENGINE BIDS TO CHALLENGE PISTON POWER."
DESIGN ENGINEERING (LONDON). Des Eng (London) Mar 1973 p 41-44.
133) Russell, J. A. et al. "AIR-COOLED ROTARY ENGINES - A FUELS AND LUBRICANTS
STUDY."
SAB PREPRINTS. SAE Prepr n 730046 for Meet Jan 8-12 1973 8 p.
134) Prasse, H. F. et al. "CRITICAL ANALYSIS OF THE ROTARY ENGINE SEALING
PROBLEM."
SAB PREPRINTS. SAB Prepr n 730118 for Meet Jan 8-12 1973 16 p.
135) Clarke, J. M. et al. "NEW CLASS OF ROTARY PISTON MACHINE SUITABLE FOR
COMPRESSORS, PUMPS AND INTERNAL COMBUSTION ENGINES."
JOURNAL OF POLYMER SCIENCE, MACROMOLECULAR REVIEWS. Inst Mech Eng
(London), Proc v 186 Pap n 62 for Meet Oct 18 1972 p 743-753.
136) Ward, Harry M. III et al. "OUTBOARD MARINE CORP'S PRODUCTION ROTARY
COMBUSTION SNOWMOBILE ENGINE."
SAB PREPRINTS. SAB Prepr n 730119 for Meet Jan 8-12 1973 13 p.
137) Behling, R. D. et al. "LUBRICANT AND FUEL REQUIREMENTS AND GENERAL
PERFORMANCE DATA OF WANKEL ROTARY PISTON ENGINES."
SAB PREPRINTS. SAB Prepr n 730048 for Meet Jan 8-12 1973 11 p.
138) Eberle, Meinrad K. et al. "EVALUATION OF THE POTENTIAL PERFORMANCE GAIN
FROM LEAKAGE REDUCTION IN ROTARY ENGINES."
SAB PREPRINTS. SAB Prepr n 730117 for Meet Jan 8-12 1973 8 p.
139) Yamamoto, K. et al. "COMBUSTION CHARACTERISTICS ON ROTARY ENGINES."
MEDICAL AND BIOLOGICAL ENGINEERING. SAB Pap n 720357 for Meet Apr 5
1972, 8 p.
140) Yamaoka, Jokiro et al. "IMPROVEMENTS OF THE ROTARY ENGINE WITH A CHARGE
COOLED ROTOR."
TELECOMMUNICATIONS AND RADIO ENGINEERING (ENGLISH TRANSLATION OF
ELEKTROSVYAZ AND RADIOTEKHNIKA). SAB Pap 720466 for meet May 22-26
1972, 20 p.
141) FELLER F "2- stage rotary engine. A new concept in diesel power"
J Automot Eng v 2 n 1 Jan 1971 p 9-14.
142) JONES C et al. "Curtiss- Wright's development status of the stratified
charge rotating combustion engines"
SAB Pap 710582 for meeting June 7-11 1971, 20 p.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.