Bulent Aliev wrote:

After Paul suggested the second pipe for the turbo waste gate, I opened my
newly rebuilt turbo. Together with an old machinist we decided that it is
very doable. Right now the waste gate is opening maybe only 3/16" or even
less. If an opening of about 2" diameter is made on the cover for a pipe,
the waste gate will open much more. The machinist said the cover plate is
forged steel and will weld very well.
The advantage as I see it, will be less stress on the turbo, comparing to
over speeding the turbo and dumping the access air out.
I have a lever on my quadrant just for the waste gate.

--
Bulent Aliev
Stretched CZ MK-IV W/Turbo Rotary
Ft Lauderdale, FL FXE
http://home.bellsouth.net/p/PWP-MyPlane

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.