For the past 60 or 70 years aeronautical engineers have steadily strove
to move the prop away from the engine for lower drag.
This is the latest attempt. It is the custom CS Hartzell prop
on the Nemesis NXT with the built in prop extension.
I like the way Charlie Airesman did it better with his carbon
fiber extension. BTW this spinner is 19 inches in diameter
and the aluminum blade tips are about a 3% airfoil section.
I am sure the blades have a life expectancy of about 30 minutes.
Paul Lamar
--ESI wrote:
I noticed other reference and pictures concerning Charlie Airesman carbon
fiber 10" tube extension. I imagine Charlie is attaching it to a PSRU but
how much farther out it extending it beyond were it would normally be? What
type of plane is he flying?
Doug in Japan
Direct drive suburu powered variez.
BTW Doug your calendar is set to 2016 which screws up everybody's inbox.
Paul Lamar
Sorry Paul
I am writing on the Japanese version of Word and the year is stated as Hesei
16 (at least in Japan it is) I changed the setting.
Doug
Thanks Doug. I went shopping over there for electronic equipment
(computers, pdas, phones) and discovered all the bios and OS software
was in Japanese :)
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.