Subject: Rear motor mount. On oil pan?
From: ACRE
Date: 6/16/2004, 7:43 AM


Bill, I took another look with the oil rad on there and
the alternator and it looks like the alternator/rear motor mount
combination won't work for me. Interference with the oil plumbing.
Also if forces it a bit too far off center for my piece of mind.

It is back to plan A the oil pan
mount. I got some ideas on improving that.


Paul Lamar


Yes, with the oil cooler under there, you could have an interference.
Bill Schertz
KIS Cruiser # 4045

BTW Ed here is what the oil separator plate looks like with some oil 
pickup sitting on top. As I mentioned the pan needs to be about an inch 
deeper. One would not want to modify these tubes as I think Mazda tuned
them. Here also is a SKETCH showing the rear motor mount feature.
I need to make a drawing of this as I moved it towards the center
to clear one of the pan bolts and made it wider to accommodate a rubber
ball joint.


Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.