Based on your drawing it looks like we are talking about different
things. The cool tube is a pipe that runs thru the muffler. It will
be fed continuous cool air via a scat hose from a NACA (maybe) inlet
on the belly. The air will enter the rear of the tube and exit the
front. Originally I wanted to bring the cool air from the nose bowl
area but the new Schertz beam location blocks that. The cool tube
increases the surface area of the muffler tremendously and since it
is
provided with a steam of outside air it will significantly knock
down
the exhaust temp. So far no one is as excited about this as Ed and I
but we think if is pretty neat. Jerry
**********************************************************************
****
Hi Jerry/Ed;
I disagree with you Jerry, I too am excited about this also as I'm
sure are others on the list. I personally feel this is one of the
biggest breakthrough we've had in the "Muffler Department" and
consider it brilliant as it opens up all kinds of possibilities....I
was also very glad/pleased to see you and Ed huddle together....I met
Ed at SNF and spent sometime with him chewing the Rag and was very
impressed with the quality of his products....Plus most importantly,
in my book he qualifies as a "Doer Par Excellan't" :)
So this doesn't come as a great surprise to me, and I expect a lot
more of the same from you and Ed ;-)
My opinion on the muffler working is very positive.......Here's my
reasoning:
Your 6"OD x.065" wall x10"lg body has an internal surface area of
176in2 (incl 3 2" pipe holes)
The 2 donut end plates 5.875"OD x 2"ID " " " " " 48
"
Total Internal surface area = 224in2,
The 2"OD x 10"lg center cooling tube has a surface area of 63in2
224 sq inches of area soaking in an engine compartment's hot ambient
will be countered by 63 sq inches of external very cool rammed in
air....Put another way, we are subjecting the Muffler to 28% of a
much cooler Contact area continuously while cruising.....This is much
better than what we presently have right now flying :)
BTW, I would definitely try the very, very best to feed it from the
FRONT and exit it to the REAR....It's just more natural, sort of like
swimming with the current....Even if it means using a P-51
snorkel....After all we all have one in our face that works pretty
good even while not running :-)
Butch
Thanks Butch. That was fun to read. My wish for tonight is that Paul
will Rhino us into the front to rear position. Sounds like the plot
for a porno movie has found its way to ACRE. Jerry
You can't do it guys. There is just so much room to work with.
The air really doesn't care which way it goes anyway.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.