Subject: Mazda is injecting hydrogen directly
From: ACRE
Date: 6/25/2004, 4:25 PM


George, (down under)
I would love to talk to you about hydrogen development. Please send me
your new e-mail off newsletter. The rotary is the engine for H2 use, but
there are many
other potentials as well. Australia is a perfect area for developing the
technology as well.
Bill Jepson


Burning Hydrogen in any conventional thermal engine is "throwing pearls
before swine"
or like using $100 bills to kindle your wood stove. Back when it was
electricity
it cost a bundle but was still worth something. - Vance


Perhaps Vance,

You are right as to the efficiency issue.  Most ICU engines aren't designed
to take advantage of pure hydrogen.  When comparing costs though I am not so
sure the argument holds up. Looking at the big picture of finding,
extracting, processing, transportation and marketing of other hydro carbon
based fuels, the energy costs of making making pure hydrogen on site is
starting to become to make more sense (cents) as well.

A this point in time rotaries running on ethanol seems more appropriate then
other fuels.  Perhaps then its like throwing corn before the swine :)

Doug in Japan

Doug, other than electric methods are there bio methods of extracting hydrogen?
Since storage of hydrogen is volume intensive perhaps it is more practical
for an airplane with a lot of unused volume in the aft fuselage as compared to
say a car. I think you might still have a range problem.

Paul Lamar


What were those numbers again for BTU of a pound of h2 vs. a pound of gasoline?

--
-dave
mailto:dave@arb.net
http://arb.net


 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.