Subject: Oil Pan Windage Tray
From: ACRE
Date: 6/25/2004, 4:20 PM

Tom Webber wrote:

Paul, Jerry and Ed and All.   Here is a picture of the Plasma Cutter
making a tray.  I've recreated the bolt pattern from an '88 pan  I hope
the pans are all the same.  Cutting the sides is easy.  So now I'll buy
some 6061 T6 and create a real pan.  The material I used to create the
proto type is 5052-H38 .080.  Comments and Suggestions appreciated.
With some slight modifications to the program,  we could create one
rotor pans as well.  Tom Webber


Tom you need to work this out with Ed as he is welding pans as we speak.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.