Brice Cottle wrote:

Is there anything short of rebuilding that can be used to free stuck rotor seals on a RX-7 engine after it has set?
                                Thanks in advance
                                                            Brice Cottle
                                            autosp@socket.net

You can try soaking the inside in auto tx fluid for a few days. 

If you can get the exhaust manifold off you can get to the seals with 
your fingers and see if they are free. Also squirt some WD 40 in there.

Paul Lamar


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.