George, (down under)
I would love to talk to you about hydrogen development. Please send me
your new e-mail off newsletter. The rotary is the engine for H2 use, but
there are many
other potentials as well. Australia is a perfect area for developing
the
technology as well.
Bill Jepson
Burning Hydrogen in any conventional thermal engine is "throwing pearls
before swine"
or like using $100 bills to kindle your wood stove. Back when it was
electricity
it cost a bundle but was still worth something. - Vance
Perhaps Vance,
You are right as to the efficiency issue. Most ICU engines aren't designed
to take advantage of pure hydrogen. When comparing costs though I am not
so
sure the argument holds up. Looking at the big picture of finding,
extracting, processing, transportation and marketing of other hydro carbon
based fuels, the energy costs of making making pure hydrogen on site is
starting to become to make more sense (cents) as well.
A this point in time rotaries running on ethanol seems more appropriate
then
other fuels. Perhaps then its like throwing corn before the swine :)
Doug in Japan
Doug, other than electric methods are there bio methods of extracting
hydrogen?
Since storage of hydrogen is volume intensive perhaps it is more practical
for an airplane with a lot of unused volume in the aft fuselage as compared
to
say a car. I think you might still have a range problem.
Paul Lamar
What were those numbers again for BTU of a pound of h2 vs. a pound of
gasoline?
--
-dave
Dave,
For numbers and comparisons of BTU valves of different fuels with hydrogen
check out this site. No endorsements H-Ion's method, but many thanks for
their information layout.
Doug in Japan
http://www.hionsolar.com/n-heq1.html
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.