Edward Klepeis wrote:

Dear Tom
       If you could make the tray out of .125 6061 the reason being
       there is alot of welding that has to be done on this plate
       and if it is to thin it will
buckel when welded making for a poor  mating seal up to the block.If
you have any questions contact me and we can talk.

                                                              Regards

                                                               Ed

techwelding@comcast.net

Does the separator plate have to be welded to the pan?  If it's just
sitting in there sealant would be needed on both sides, but that
shouldn't be a major problem.

Bob White

--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (soon)

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.