> > >Paul, that looks like two straight pipes with a slight downturn for the exhaust. It makes my ears hurt just thinking about it!
     > > >Bill Jepson

     > > Those are two glass packs on there. Remains to be seen how long they will last.
     > >
     > > Paul Lamar

     > I would give them about 30 seconds.
     > Bill Jepson

     Sure looks cool :)

     Mike's exhaust consists of a 321 stainless tube with the outside end welded shut; he then drilled alot of holes in the inside pipe like the inside
     of Tracy's and Tom Jordan's pipes (on the inside of their muffler).  Mike then fabricated an outside tube to cover the inside tube.  So what we have
     is 1/2 of a convensional muffler.  So, the exhaust flows thru the inside pipe, makes a 90 degree turn into the outide section, then travels the area
     between the pipes to the muffler exit.

     Ken P.

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.