Jerry Hey wrote:

Where is the best location to locate the oil temp sender?  Is the pan
o.k.?  Do we have a recommendation for a specific unit and a source?
Thanks,  Jerry

The pan is OK but I would like to see at least two oil temp sensors.
One going into the cooler and one coming out of the cooler.

The one going into the cooler should be the pan oil temp plus a little
for the work the oil pump did on it sucking it up out of the pan.

Three sensors  would also be interesting (another in the pan) as then the 
efficiency of the oil pump and plumbing can be determined.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.