> > Our new pump body solved the oil pump problem we had. We are
now
> > proceeding with the normal flight-test schedule on our Piper
Arrow. It
> > was flown today at maximum continuous power for 30 minutes
with
> > temperatures constant and in the green. I have some nice
in-flight
> > videos, but I am afraid Paul cannot handle video files.
> >
> > An important milestone was reached today on the bench: a
MISTRAL engine
> > ran on jet-fuel on the bench. To be truthful, only on a very
modest
> > load of 80 BHP as we have to move with caution to stay out of
the
> > jet-fuel's very different detonation zone, but it ran SILKY
smooth. The
> > same trial would have probably destroyed any gasoline piston
engine.
> > But don't take it wrong, we still have A LOT of work to do
until we have
> > a certifiable jet-fuelled engine.
> >
> > Hope to see you all at Oshkosh. You'll find us at the North
Aircraft
> > Display, lots 436 and 437.
> >
> > Francois Badoux, CEO
> > MISTRAL Engines SA
> > email: f.badoux@mistral-engines.com
> > Web: www.mistral-engines.com
Francois,
Any late info on the oil pump drive chain loads that was mentioned
in previous post? Also has a decision been made yet if you will sell
the pump body and/or pickup?
Kelly Troyer
--
Dyke Delta/13B/RD1C/EC2--
We ran the engine on the bench for about 20 hours since we changed the
oil pump, including some prolonged max power runs... no problem so far.
But we'll be doing more in-depth calculation of the loads on the drive
chain when we'll have a bit more time after Oshkosh.
We may well offer the pump body and pick-up tube for sale but we need a
production run of at least 10 if not 20 if we want to keep the prices
reasonable. I can't tell you now when we'll pass that order.
Best regards,
Francois Badoux
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.