> > Our new pump body solved the oil pump problem we had. We are now
> > proceeding with the normal flight-test schedule on our Piper Arrow. It
> > was flown today at maximum continuous power for 30 minutes with
> > temperatures constant and in the green. I have some nice in-flight
> > videos, but I am afraid Paul cannot handle video files.
> >
> > An important milestone was reached today on the bench: a MISTRAL engine
> > ran on jet-fuel on the bench. To be truthful, only on a very modest
> > load of 80 BHP as we have to move with caution to stay out of the
> > jet-fuel's very different detonation zone, but it ran SILKY smooth. The
> > same trial would have probably destroyed any gasoline piston engine.
> > But don't take it wrong, we still have A LOT of work to do until we have
> > a certifiable jet-fuelled engine.
> >
> > Hope to see you all at Oshkosh. You'll find us at the North Aircraft
> > Display, lots 436 and 437.
> >
> > Francois Badoux, CEO
> > MISTRAL Engines SA
> > email: f.badoux@mistral-engines.com
> > Web: www.mistral-engines.com
Francois,
Any late info on the oil pump drive chain loads that was mentioned
in previous post? Also has a decision been made yet if you will sell
the pump body and/or pickup?
Kelly Troyer
--
Dyke Delta/13B/RD1C/EC2--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.