Subject: Second stock turbo bites the dust
From: ACRE
Date: 7/12/2004, 8:22 PM


The best material I have heard of for turbo's is Inconel. Inconel is
an option
on a lot of turbo's now adays. I have no idea what the stock Mazda
turbo uses.
Paul Lamar


Thomas Parkes wrote:

Paul:

I've been following this turbo failure thread with interest.  Obviously
there is a great deal we do not know regarding turbo longevity and operating
limits, but it is just as obvious that one turbo may have limits quite
different than others.

My Garrett TE-06 does have an inconel turbine and its published maximum
continuous EGT limit is 1650 F.  That is a good thing, because my 28" MAP
cruise EGT runs pretty consistently at 1600 F + or - 25 degrees.  Anytime I
have tried leaning it substantially at that power setting, the EGT goes
through the roof--to over 1700 F--and I quickly enrich it.

Perhaps there is some way to remap my EFI, but it will take someone with far
more savy than I.

Incidentally, my 20B engine, turbo and prop have been overhauled.  I'm
currently adjusting Tracy's PSRU to my existing front engine mounts and will
soon begin reassembling everything.  I hope to be flying again in August.

Tom Parkes

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.