Hayes Rotary Engineering got the contract to rebuild a few
priceless CW RC2-60 U5 engines one of which Ford installed in a Mustang.
The Mustang was as fast as a 289 V8 despite a puny 2 barrel carb on the
side port rotary.
http://www.hayesrotary.com
The Mazda racing rotary engine builders have been knocking themselves out for
the last thirty years trying to figure out how to add a center
main bearing. At really high RPMs over 10,000 the shaft is deflected
slightly due to the off set of the rotors. This is noticeable in
the main bearing wear pattern. Also the rotors cock in the rotor
housing slightly. CW solved this problem years
ago and this is how they ingeniously did it. They used a three segment tapered
center main bearing mount. Once clamped in place with a 18 small
screws it made a very rigid unit with the aluminum center housing.
Paul Lamar
More info on the CW rotary powered Mustang from the Norbye book.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.