Bulent Aliev wrote:
Here is her reply. These people are crazy!
Bulent
------ Forwarded Message
From: "Connie Greco" <connie.greco@industrialairsolutions.com>
Date: Tue, 13 Jul 2004 09:32:55 -0400
To: "Bulent Aliev" <atlasyts@bellsouth.net>
Subject: Re: U Bends
checked with factory and the pricing I gave you is correct. This is a "special" part, based on description I gave you below.
Go ahed with the other company. I don't know who they are, but go for it.
Good Luck
----- Original Message -----
From: Bulent Aliev <mailto:atlasyts@bellsouth.net>
To: Connie Greco <mailto:connie.greco@industrialairsolutions.com>
Sent: Monday, July 12, 2004 4:40 PM
Subject: Re: U Bends
Hi Connie, something is very wrong with these prices. Please look at this page:
http://www.burnsstainless.com/AluminumTube/Ubends6061/ubends6061.html
I had Paul Lamar order bends from you and your prices to him were $7.50 each for 90 degree bends the same size.
I can?t see how the same size tubing 180 degree bend is 1300% more expensive? :) Don?t you agree?
Bulent
On 7/12/04 10:50 AM, "Connie Greco" <connie.greco@industrialairsolutions.com> wrote:
Pricing:
p/n Special : 180 deg. 1 - 1/2 on 3 CLR 16 ga. alum. with 12" tangents
$129.95 each.
p/n Special: Bend 180 deg. 2 on 3" CLR 16 ga alum with 12" tangents welded $99.99 each.
Terms: visa/mc/amex
Delivery: 7-10 business days
Call me to order, and thank you !
----- Original Message -----
From: Bulent Aliev <mailto:atlasyts@bellsouth.net>
To: Connie Greco <mailto:connie.greco@industrialairsolutions.com>
Sent: Thursday, July 08, 2004 5:17 PM
Subject: Re: U Bends
On 7/8/04 10:07 AM, "Connie Greco" <connie.greco@industrialairsolutions.com> wrote:
Hello Mr. Bulente, I was asked by the factory to have you draw (doesn't have to be technical, but should have
dimensions requested) Also, the item would be 16 gage ( or .065 wall)
Just fax to my number below. Thanks,
Connie Greco
Industrial Air Solutions, Inc.
6300 Limousine Drive Suite 120
Raleigh, North Carolina 27617
Ph: 919.844.3293 / Fax: 919.518.1667
Look For Additional Products On Our Website: www.industrialairsolutions.com
<http://www.industrialairsolutions.com>
Hi Connie,
There is no big deal, I just need:
Two U-bends 3? Radius 1.5? aluminum tubing 16 GA (0.065) wall with the straight legs 12? (one inch more or less does not
matter)
Two U-bends 3? Radius 2? aluminum tubing 16 GA (0.065) wall with the straight legs 12? (one inch more or less does not
matter)
Please let me know the price plus shipping
Thanks
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.