> **** The racers are fitting the RX8 front cover to the earlier engines, I
     > believe it is an easy mod. Better way to go than messing with the old water
     > pump.  Dave McC

Dave, we'd be interested in this mod as it would solve the issue of the crank sensor too, but is there a mount on the cover as well?
..Chrissi

***** Hi Chrissi,  I assume you mean 3rd engine mount. After talking with Don Dunbar who has an RX8 in a Mustang 2. The RX8 does not

have the mount under the e shaft ala old 12A cover, nor the two strakes to weld to. However, after moving the alternator from the 12
o'clock position to the center left( aircon compressor,I think), you then have a convenient mount pad in the old alternator position,
(center high). Dave McC

http://www.cozygirrrl.com/
Cozy Mk-IV RG turbo RX

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.