George Lendich wrote:

     > > >***** Hi Chrissi,  I assume you mean 3rd engine mount.

After talking with Don Dunbar who has an RX8 in a Mustang 2. The RX8 does
not

     > > have the mount under the e shaft ala old 12A cover, nor the

two strakes to weld to. However, after moving the alternator from the 12

     > > o'clock position to the center left( aircon compressor,I

think), you then have a convenient mount pad in the old alternator position,

     > > (center high). Dave McC

Dear Dave, thanks for the information. Is the rx8 cover otherwise a

direct bolt-on to the 3rd gen engine?

...Chrissi

**** Not direct bolt -on, but easy mod. I'll do some checking with

the racers and get the details; it will take a day or two. Dave McC

http://www.cozygirrrl.com/
Cozy Mk-IV RG turbo RX

Dave,
I'm keen to know all about that as well - thanks for the effort!
George (down under)

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.