Subject: AMV; you want far out?
From: ACRE
Date: 7/18/2004, 9:34 AM


Al Gietzen wrote:

A friend took these photos yesterday at nearby Ramona
airport.  Web
site
is
at http://amvaircraft.com/.

Turbo 13B intended to produce over 400hp.  We know it
can taxi.  The
plan is
for hover testing today.

Al


"Brian D. Cain" wrote:

If I had a picture of the turbocharger, I could tell you
whether or not
it
truly will produce 400hp.

B

"Brian D. Cain" wrote:

Looks like some sort of Garrett T04E model with a fairly large turbine
housing.  They may be able to get 400bhp out of it but that's
pushing it;
we're talking 15psi or above of boost pressure to achieve that
at very high
RPM's (7000rpm+).  I take it this magical horsepower figure is only
worthwhile for taking off?  Why so much power needed?

B

It is a ducted fan and they are notoriously inefficient compared to say
a helicopter.

Paul Lamar

I flew out to Ramona again today to try to have a look at the hover tests.
I started asking around the airport.  Turns out that they were using some
sort of composite intake manifold that couldn't take the heat/pressure.

So he is going to make a metal version.

Dave Leonard

Thanks for the report Dave. BTW do you have a knock sensor?
Here is a real simple one to make. It uses a cheap Radio Shack single
chip audio amp and a plug in ear piece. Or you could feed the audio
into your intercom. I know you have seen this before but here it is
again for the new people.

I have some more info on BSFC verses leaning so it would be nice if we
can figure out how to lean the turbo to the EGT 200 degree F lean
of peak range. Will upload that shortly. You want to sneak up on
this at low boost settings.

BTW Brian, have you done any work on leaning the turbo engine  fuel injection
map at low boost settings? Say for cruising down the highway?

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.