Larry & Donna Evans wrote:
Enjoyed our conversation at Arlington. I am interested in an autocad drawing showing the physical dimensions of the 20B. Also info on the 3D program we talked
about.
Thanks!
Larry Evans
I don't have ACAD drawings of the engine. Only 3D drawings in Rhino format.
http://www.rhino3d.com/
I might be able to export to ACAD. What version are you running?
In the mean time here are a few 2D gifs.
Paul Lamar
BTW I forgot to mention the distributor is no longer needed.
The water pump can be cut down to be flush with the top of the
rest of the engine. Also the oil filter can be remotely mounted
to reduce the height of that. Add one rotor housing and about 3 inches for
a special three rotor intermediate housing.
Here is a 3D of the bare 2 rotor. I also have 3D's of completely
dressed engines.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.