Subject: Incredibly cheap knock sensor amp/Freedom Motors
From: ACRE
Date: 7/23/2004, 6:23 AM



Jameco Electronic has these amplifier kits one of which should work
fine for our purposes. All you need be able to do is solder a printed
circuit board. My guess is the last one down would work the best.

http://www.jameco.com


Paul Lamar

Paul the price looks nice. Panel mount would be smart. Volume and on/off
switch makes things tiny. But perhaps I have been over here to long. I
should be asking how BIG it should be:)

Anyone can solder this up easily.  Would the output be soldered to the
headphone  jack.  Or would it be better to have a combination male/female
adapter that would plug into the audio input and the headphone line would
then plug into the female backside of the adapter.

The panel could contain a LED with a "ON" status only but could blink if the
output signal reached a certain threshold. Your thoughts.

Doug in Japan


All you really need on the front panel is a mini jack for the ear phones,
perhaps
a red power LED and an on and off switch. A lot of guys have panel space
limitations. I think any kind of visual indication of knock is not going
to work well. It may not attract your attention in time to back off.
Second; it is real hard to program a signal processor to tell the
difference between normal engine noises and knock IMHO. Your brain does a good
job of that just from the sound. MSD did both but it took a much larger
and more expensive printed circuit board and case. Here are a few shots
of the inside of the MSD unit. On the other hand backing off could be
done automatically with a signal processor. That in and of itself
is somewhat controversial as in; do you want the engine to back off when you
are heading for the trees? Something like that happened to an Airbus at
least one time. Perhaps a quick throw of the on and off switch would
prevent that.


Paul Lamar

Douglas Fir wrote:

 IMHO the device we need should feed the knocking noise into our aviation
headphones when it reaches a (user adjustable) threshold. This level should
be before knocking occurs and can be determined by experimenting.  A
flashing LED wouldn't hurt either as  your eyes would pick it up in the
instrument scan.  You do scan the instrument panel occasionally do you
not?:)

On another topic it seems Freedom moters is finally going into production.
Their site is at  http://www.freedom-motors.com/

They sent me some PDF files of their products if interested.

doug in Japan

How sure are you Doug? :) We have received many such announcements in the last
few years. Notice the address is Davis California which is Moller's location
while being incorporated in Nevada.

The pictures look like a wood mockup to me. The HP curves are so fuzzy I cannot
read them. Here is another graphics we have received sometime in the past. 
The center e-shaft coupling could be problematic if it is real.
I would not send them any money. Ask them if you can have a tour of the
factory and I will find someone that lives near Davis to take some pictures.
I know just the guy :)

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.