Hi everybody!
Listening in on all the incredible development/ideas/brainstorms on ACRE, I wondered whether it would be feasible to prototype/manufacture Rotary parts from
scratch out of billet material.
I know of course it is possible, but at what cost!! Now this is the oint where I wonder, whether a relative low volume production could possibly pay off/brake
even (for the sake of the community ;))
Unfortunately I don't have any facility of my own nor do I have the knowledge to calculate some of the following points, but I do have the dream to get there
some day!
As an example (and probably the only one in existance...) for a working/producing/money making/ all CNC aircraft engine production serves
http://www.jabiru.net.au/ - click on "Engines" Sorry it is recip, but no one does CNC rotaries - yet....
# How difficult would it be to CNC a new intermediate sidehousing out of billet?
# A new single excenter shaft for 3 and 4 rotor engines?
# New center bearing layout like the Curtiss Engines?
If Jabiru can make money producing Cylinders and cranks and other smaller stuff out of billet, what would be reason this would not work for the Rotary?
# New intermediate sidehousing with bigger side exhaust channels and centerbearings (Curtiss style)
# New one-piece excentershafts 1 to 4 rotors (Curtiss Style)
# Rotorhousings are already available with peripheral ports (although I understand they are a little toooo big for our application :)), but it seems it is
fairly easy to modify existing housings, though I would really like to see Alu-housings.
# Hightemp and Highwear coatings seem to be available even for one-by-one application.
Result:
# All Alu engine
# one-piece shaft with all intermediate center bearings
# Modular 1 rotor to 4 rotor (or the lord and you guys forgive, all the way to 6!!)
# Peripheral intake
# Side exhaust
# 8000 rpm take-off/ 6800 cruise
I know most of this was/is discussed currently on the forum, but no one brought up the economic possibilities of making low volume parts specific for our
applications. I hoped for, from someone who is in the business, but so far no one put this together.
This is all theory (or dreams or pipe dreams...) and again I do not have the means nor the finances to go after this at this time,
BUT it would be interesting to know YOUR thoughts - pro and contra about manufaturing/prototyping/technology!!
Diving for cover!
Thomas J.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.