Diving for cover!
Thomas J.
Tom,
Mind if I call you Tom !?
CNC work can be very expensive unless one has their own CNC machine -
not
many of us have!
AT $80 an hour it doesn't take long to make a common part, a several
hundred
dollar common part - don't ask how I know.
Volume production is AN answer but not usually for such a low volume
demand - such as Aviation.
If one can manufacture for the general auto market or racing and
benefit
the
Aviation market, that would be good, but we see many of these parts as
expensive as well.
There are many 'IDEAS man' such as yourself, but not many actually
doing
the
work, however there is a band of dedicated Aviation enthusiasts trying
to do
the things you suggest, and spending a lot of dollars doing it.
My suggestion to you is to give them all the support you can.
George (down under)
No I don't mind! :)
I read what you mean, but again, I saw Jabiru's site and was quite
amazed at
their way to produce for the low volume aviation market!! Farm out and
nearly everything CNC!
Thomas J.
"Tom"
Tom, here's from a post a few days ago. Did you see this from Mark Wiese?
From July 15th:
> I don't know if this has been brought up before, but there is now an
online "machine shop" that will make parts. www.emachineshop.com will take
your drawings and produce the part.
> Marc Wiese
It's an interesting setup. I downloaded the software. It's a very basic
CAD program that that does basic 3D and is set up for CNC work orders.
You draw up your part starting with the material and machine it is to be
carved with. From aluminum to titanium, they even have Monel on the list
if you're feeling flush. Machines include CNC mill, laser, water jet,
lathe, etc. In the end when you are satisfied with your drawing you put in
your order and the part arrives on your doorstep in a few days or weeks or
sometime.
It sounds like quite the proto-typing resource. They'll even build parts
by the thousands if your credit card holds out. However, you could spend a
whole lot of dough on prototype parts that needed revisions if you weren't
careful.
Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode, RD-1C, EC-2
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.