marc wrote:
i everybody. Just finished a business trip.
17 hours of turbo-normalized operations in the last three days - all
lean of peak TIT.
Altitudes from 3000 MSL to 18,000 and everywhere in between.
ADH to ORL to PNE to ADH (55Kt headwind) ... headwinds on two of
three
legs.
Average power? 92.5% of rated 200 HP continuous in cruise.
Average torque? ~ 102% of rated torque; hottest CHT = ~ 378;
TIT =~ 1505 to 1525F; and normal BSFC = ~ 0.385 lbs/hp/hr.
Marc Wiese
How do you know what the BSFC was? How many gallons of gas did you
use?
Paul Lamar
All of them, Paul! JPI 800 in use, ;=)
[Marc Wiese]
Well of course you used all of them. How many gallons did you put in the tanks?
What is a JPI 800?
Paul Lamar
Douglas Fir wrote:
Hi Paul,
I had a good chat with the young 35 ish VP Mr. Masuda. Turns out he is
handling domestic sales in Southern Japan now. Probably working his way up
and through the different corporate divisions.
He promised to give your turbo compound rendering plus a report I wrote
about the concept, to the engineers today. They will contact me soon.
I told him I am looking to acquire an engine to start testing some ideas in
the autumn and had lots of questions for the engineers. He was quite
enthusiastic when he realized I hadn't approached the engineers yet. In any
case I found him very open and receptive so I told him that there are quite
a few aviation buffs around the world that believe Mazda's rotary engine is
so superior that they are putting it in their aircraft. I stressed the fact
that many of the ACRE members were responsible engineers and very talented
people and were discovering new ways to improve the engine all the time. In
short it is a GOOD THING to have a relationship with people who are bringing
Mazda's engines to new heights:) Hopefully it will be the start of a long
relationship. He will be coming up to my city in September to see some of
the environmentally friendly projects we have completed at our Institute.
After his visit my wife and I will go down to the Mazda headquarters.
Meanwhile I will try to meet some of their engineers. Probably in Tokyo.
Other topics discussed related to marketing.
Hydrogen hybrid car release in 2008 ..... not likely.
The all aluminum engine....... no time soon, doesn't appear they are
considering it at all.
Free case of Sapporo beer in the trunk of each RX-8 going to Australia. Just
kidding George, we all know one case isn't near enough:)
Ford Motor Co..... Ford has been lowering their stake in Mazda over the
last few months. Ford is still the number 2 shareholder though.
Final analysis? Very good start, Yes, I think, Maybe.
Doug in Japan
Don't forget to ask for a tour of the amazing engine factory. Please take a
bunch of pictures wherever you are allowed. Mine are not that great.
I am sure glad to see Ford is getting out of it. My impression is Ford Corp.
is
so large it suffers from committee-itus to the point of paralysis.
I am ready willing and able to go again to Japan.
I sure hope they do something to improve the BSFC. I am worried about
the future.
Paul,
Reading body language I think the improvement of BSFC is of primary priority
in their marketing efforts. I am afraid it will probably take precedence
over offering the LeMans engine in the Miata:) Call me silly but the age of
gasoline guzzling cars and planes? is approaching the end.
The real question I want to know is if Marc's BSFC is really at .385? That
number seems low but impressive if accurate.
I just bought a C-150 from my brother. It has a new annual, the engine is
like new because it was completely overhauled a few hundred hours and a few
years ago. Recently it has received new wiring and circuit breakers. Good
cheap slowwww vehicle to build air time and take the frustration out of
not flying while building. Could use a paint job. It cost me $14K. Good
deal says older brother. Hmmm? I am looking for someone in the LAX or SFO
area who can offer free hanger space and perhaps half the purchase cost in
exchange for flying rights for the plane. I bought it as a good time
builder and for business trips up and down the West Coast. As this type of
plane will only continue to go up in value I may want to sell it in the
future when my SeaWind is flying. I will only be able to fly it once or
twice a year though. Hence it needs a good caretaker. Only serious pilots
need apply:) BTW my bro. is a A&P, plane builder, and owner of Sundance
Aviation and airport in LaBelle Fla. His name Ken Alvey might pop up in one
of the accident reports from the FAA soon. Some skydiver caught her chute
on the door frame of the jump plane he was flying recently. She came down
safely after cutting away but managed to take off half of his tail on the
way out at 10K'. Needless to say landing a plane without further damage in
such a situation was quite interesting. But then he has been flying since
before he could drive a car. I'll make a rotary guy out him yet:)
Doug in Japan.
" The real question I want to know is if Marc's BSFC is really at .385? That
number seems low but impressive if accurate."
You are very right. I doubt that myself. That is why I asked him how much fuel
he put in the fuel tanks for 17 hours of flying. So far he has not answered.
That BSFC would be almost a new worlds record for a non diesel piston engine.
Right up there with the liquid cooled Continental Voyager engine. There is a
company in the midwest hyping very expensive sets of matched mechanical fuel injector
nozzles and making fantastic claims of huge benefits for running the engine 50
degrees lean of peak. The problem is nobody is throwing the slime ball advertisers
in jail for lying :) Certain highly complex and hard to disprove subjects are the
happy hunting grounds for the charlatans and con artist of this world.
There is a little truth in the fact that EGT's on any engine
tend to be all over the lot. I have a six cylinder EGT/CHT scanner on my C182.
In theory if you can get the mixture exactly right
on each cylinder the engine will indeed run smoother at 50 degrees lean of peak.
But the BSFC is not going to go from the typical .45 all the way down to
.385. My guess it is more like .44 or .43. Marc implied that a JPI flow meters
or EGT/CHT gage was some how telling him a BSFC of .385. Note the last digit
of precision. Low cost flow meters are imprecise sensors at best. For one
thing most don't compensate for the effects of temperature. They also have
a real tough time accurately measuring the small return flow from any return
flow type fuel injection system.
On the other hand JPI makes a good product and I also have a JPI flow meter
in my C182. It is much easier to set the mixture right with the JPI flow meter than
just using the EGT alone.
I am also wondering where he came up with an average power 92.5% of peak power?
As far as gas guzzling cars are concerned you would think so. In Europe
where gas tax prices are through the roof there is a V12 cylinder HP race going on.
If you don't have at least 600 HP you ain't:) However the vast majority of
Europeans drive small low fuel tax diesel powered economy cars. In Japan
where they charge horrendous tolls for using the express ways and the
Shincansin (bullet train) is competing with cars for long distance travel
things are different. Even smaller cars like the Honda Life dominate sales. To me
it just illustrates the huge difference politics and tax policy plays
in the type of cars people drive.
I don't buy the contention that we will run out of oil. That ignores negative
feedback. The price will rise to the point of demand. Tax policy can modify
that to some extent but not to the point oil will remain cheap for ever. Right
now, in the US, even with all the tax gasoline is cheaper than bottled drinking water.
In terms of real money it is probably lower than it has ever been.
The crazy California legislature has labeled carbon dioxide a pollutant.
What are the poor oxygen generating trees and plants going to do for food?
They could start by preventing the lying politicians from breathing. That would
be a significant reduction in carbon dioxide :)
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.