Subject: CNC prototyping and/or manufacture
From: ACRE
Date: 7/31/2004, 4:37 AM


No I don't mind! :)

I read what you mean, but again, I saw Jabiru's site and was quite
amazed at
their way to produce for the low volume aviation market!! Farm out and
nearly everything CNC!

Thomas J.
"Tom"

Tom,
Yes the Chap who designed the Jabiru has a machine shop background I know
the fellow who sells him his CNC machines.
They ( Jabiru) do a lot of outside work to compliment their aircraft
production, I don't know if it's true but someone mentioned they run 24/7
with minimum supervision.
This is quite a large operation and THEIR production is all reciprocating
engine technology.
If we had a large enough demand they would consider doing things for us -
but volume is the key word - did I say that stock cost a lot of money as
well.
I think our only hope is in the cottage industry  -speaking from a Logistics
background.
George (down under)

Speaking of Jabiru here is one part of the Jabiru engine that needs beefing up.
This stud fatigued and broke off after 500 hours. Seen at OSH 2004

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.