Subject: CNC prototyping and/or manufacture
From: ACRE
Date: 7/31/2004, 7:35 AM


Diving for cover!

Thomas J.


Tom,
Mind if I call you Tom !?
CNC work can be very expensive unless one has their own CNC
machine -
not
many of us have!

AT $80 an hour it doesn't take long to make a common part, a
several
hundred
dollar common part - don't ask how I know.

Volume production is AN answer but not usually for such a low
volume
demand - such as Aviation.

If one can manufacture for the general auto market or racing and
benefit
the
Aviation market, that would be good, but we see many of these parts
as
expensive as well.

There are many 'IDEAS man' such as yourself, but not many actually
doing
the
work, however there is a band of dedicated Aviation enthusiasts
trying
to do
the things you suggest, and spending a lot of dollars doing it.

My suggestion to you is to give them all the support you can.
George (down under)

No I don't mind! :)

I read what you mean, but again, I saw Jabiru's site and was quite
amazed at
their way to produce for the low volume aviation market!! Farm out
and
nearly everything CNC!

Thomas J.
"Tom"


Has anybody tried this CNC place out:

http://www.emachineshop.com/

Sounds like just what you need. They even give you their own CAD
program. Now we just need all the RX7 12A and 13B parts drawn into cad. :)
Rich Gillen

I downloaded their program and it looks it is really VERY simple to use! A
good primer for Rhino, AutoCAD, etc.
Thomas J.  :)


 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.