Subject: CNC prototyping and/or manufacture
From: ACRE
Date: 7/31/2004, 7:36 AM


Snipped....
Tom,
Yes the Chap who designed the Jabiru has a machine shop background I
know
the fellow who sells him his CNC machines.
They ( Jabiru) do a lot of outside work to compliment their aircraft
production, I don't know if it's true but someone mentioned they run
24/7
with minimum supervision.
This is quite a large operation and THEIR production is all
reciprocating
engine technology.
If we had a large enough demand they would consider doing things for
us -
but volume is the key word - did I say that stock cost a lot of money as
well.
I think our only hope is in the cottage industry  -speaking from a
Logistics
background.
George (down under)

Speaking of Jabiru here is one part of the Jabiru engine that needs
beefing up.
This stud fatigued and broke off after 500 hours. Seen at OSH 2004

Paul Lamar


George,

I am afraid you are right about the cottage industry!
I also hope Mistral will make it!! That would give the Wankel some real
credibility in the certified world!!

Thomas J. :)

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.