Subject: CNC prototyping and/or manufacture
From: ACRE
Date: 7/31/2004, 7:44 PM


Speaking of Jabiru here is one part of the Jabiru engine that needs
beefing up.
This stud fatigued and broke off after 500 hours. Seen at OSH 2004

Paul Lamar


George,

I am afraid you are right about the cottage industry!
I also hope Mistral will make it!! That would give the Wankel some real
credibility in the certified world!!

Thomas J. :)


Paul,
The Jabiru engine are made of the very best of materials with weight being a
major consideration, their workmanship is superb as is their facility.
I wonder how light you can go in designing for a reciprocating engine, I've
heard from some that they feel that the design is a little too light in
areas - however I'm no engineer!!

I'm surprised the stud broke as it's steel - maybe a flaw in it !!

A good friend of mine and a mechanical engineer is very impressed with the
engine and the Jabiru facility - he has recently purchased a 4 place Jabiru.


Tom,
Mistral might be OK in the Certified field and it may expand to non-
certified areas in the future.
After speaking with Francois we are both of the opinion we would like to
redesign the Mazda engine from the ground-up. Just changes to more suite the
Aviation side of things,  but these types of investments are reserved for
the multinationals with their multimillion investment capability.
I would like the new e-shaft and rotors with side ported exhaust and PP
inlet, a water pump mounted much lower and a better oil pump, just to name a
few things.
The cottage industry has a lot going for it, sadly money isn't one of them!
We have to just keep trying to network and encourage those who can see their
way clear to adapting parts etc.
George (down under)

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.