marc wrote:
On another line, even though my friend was kind enough a few years
ago to go up with me in my GAMI / JPI EDM-700 equipped '71 RG and give
me a tutorial on how to do Lean Of Peak (LOP) management, I have been
very reluctant to do so under the "Fuel is still cheaper than parts"
theory (when my other friend & I went up, we actually got it, using the
GAMI's - to 90 deg. LOP and still running smoothly if not strong). On a
long trip back from out East I had an unusually good tailwind at low
altitude and decided to play with it. Went to 50 deg LOP according to
the gauge and was AMAZED - the engine actually sounded smoother than the
100 deg ROP I usually use, and the cylinder head temps dropped almost 50
degrees!
I was showing 265 or so on the hottest cylinder (NOT #3, interestingly
enough, like it does in ROP ops) and about 245 on the coolest, when
under my usual ROP settings they would have been running about 300 +- 15
deg. And the fuel consumption dropped from 11 gph to a measly SEVEN! It
did give me about a 15-20 knot hit on my groundspeed, which I didn't
like, but not having to stop for fuel more than made up for it.<<<
7 gph on a 200 hp engine give a very low Bsfc........however this is not
a turbo-normalized engine and the hp output at those settings is
probably pretty low......
Marc Wiese
I see the problem. You don't calculate the BSFC on the basis of the engine peak HP
rating but rather the actual HP being generated at 50 degrees F lean of peak.
By my calculations at 7 gal and hour and using a BSFC of .43 the engine was
generating around 98 HP. Understandable by the fact it was cruising 20 knots
slower than normal.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.