Michael McGee wrote:

The spinner has a molded in flange with the nut plates in it.  This fits
against the spinner rear bulkhead and the screws go in from the back side
of the spinner.

I don't recall it being in a magazine but that doesn't mean much.  There's
a guy here in the Portland area that makes them.  I'll ask around and
report back on price and availability.  If you are good at fiberglass work
it shouldn't be hard to make.

MGM

Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode, RD-1C, EC-2

Doug wrote:

Group,
Can anyone take a moment and tell me what magazine (Name and Date of
Issue) I saw an article on attaching a spinner without any screws from
the outside. I have been racking my brain and cannot find it. I thought
it was an RV builder that did it but I am not for sure. Did anyone see
one at Oshkosh where they can tell me how they secured it?
Thanks,
Doug Mueller
RX-6 13BT
N900DM
Boulder City, Nevada

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.