Kelly Troyer wrote:

       Steve

       Do you have a photo of your installation?



      Kelly Troyer

     > "Rosine, Steve - NV" wrote:
     > >
     > > Quite a while ago, a builder reported on a small starter available from
     > > a surplus outlet, that he believed would work for the Mazda. That
     > > builder never posted any confirmation that this starter would work.
     > >
     > > In a weight reduction effort, I have replaced the 11 lb. Mazda starter
     > > with this 7lb. unit, and I am happy to report that it starts the engine
     > > just fine. The bolt pattern is not the same however, and I needed to
     > > drill new mounting holes in my PSRU back plate. The starter also had to
     > > be mounted on the back side of its bolt hole 'ears' instead of the face
     > > for the pinion gear to mesh with the flex plate.
     > >
     > > The cost for this 4lb. Weight loss was $19, and half hour to fit. The
     > > starter is made by Nippon Denso and is available from Surpluscenter.com
     > > --- 12 VDC NIPPONDENSO 028000 STARTER Item# 10-1386. They appear to
     > > have 47 in stock.
     > >
     > > Steve Rosine
     >
       Steve

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.