Mark Wrathall wrote:
Hi Paul,
Looks like you were beaten to the square throttle butterfly by at least 60
years.
This is the throttle assy off the Rolls Royce Eagle. Note the trick to
offset the pivot to get a straight shot without restriction at WOT. Probably
simpler than the wheeled dolly slide throttle for a PP 13B.
http://www.enginehistory.org/ModelEngines/Hares/Eagle%2022/4r.jpg
These parts are from a 1/5 scale Eagle (being) built by Barry Hares. We
think installing a 13B is a big engineering challenge, think to the
dedication and effort to design and manufacture a 1/5 scale working example
of a 24 cylinder, sleeve valved, injected, two stage two geared supercharged
engine + C/S prop which never reached series production.
http://www.enginehistory.org/eagle_22.htm
He had already built a running 1/5 scale merlin.
http://www.enginehistory.org/merlin_xx.htm
I found this stuff on the Aviation engine historic society website.
http://www.enginehistory.org/
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.